thschram

No, nothing tall or plush. It is thin in most spots and I keep it mowed pretty tight. The only other thing that makes me nervous is that it is kind of bumpy in some spots.

twomanytoys

A buggy is great but best on a track, smooth dirt or short grass. If you have any rough terrain you want to run in then the volcano , avalanche or tsunami would work better.

ehroof

i run my hurricane on low cut grass, like a lawn but in anything more than a few, meaning 3 or 4 inches, you would need something with more clearance.

rclynx

yep the Tremmor is to low and the clutch burns up pretty easy in grass[&:]

twomanytoys

Tremor? Thats the 1/16 truck. He is thinking about the buggy.

gert 78

has any one put a .21 hpi engine on a tsunami befor what will it do to it will it mess it up

ehroof

i have seen a hyper .21 on a volcano, it can be a gear eater but its fast and pulls some serious wheelies, pm rc danny about it.

rclynx

Will see how a an old .27 does fairly soon.............they called and said my mounts were ready finally, now all that needs to be done is drill them and set up the exhaust and were off to the gear stripping contest. I got 20 sets of mounts made to set up and I'll have the clutch set up and everything including the exhaust in the next 2 weeks

ehroof

nice, now hurry up!!!!!!!!!!!

gert 78

hi again my tsunami it keeps overheating it run at 260-270 how do i stop thiscan someone help me

AllAboutFunHobbies

Check your exhaust gasket, fuel line tubing and fuel tank for leaks. Make sure the needles aren't set too lean.

gert 78

can any one tell me what the different between the sh-18 and vx-18can someone help me

twomanytoys

The SH is an actual good name brand. The vx is something that pretty much comes with all the chinese trucks. The sh is much better.

rclynx

If your looking to swap it out go for it, They are the same accept for the workmanship on the SH is twice that of the VX[]

rclynx

Boy I'd like to get my toy (TUSNAMI wheelie KING) together but this is the way the shop has shaped up in the last 3 days / 2 Mammoth kit builds, another EF 16 induction fan Jet, carb and suspension on a Rusty, X-cellerator engine problem and an MT break-in today with an X-factor tomorrow with an Earthquake custom also....................wish it was like this all the time so I could quit my other job............lol[:-]

ehroof

the sh has more power, starts up easier and is much easier to tune and holds a tune better, i have one in my volcano.

AllAboutFunHobbies

Hey I have that same drill press, LOL. Comes in handy for small stuff.

Chubbysdad

My Feedback: (1)

your pretty organized. ... I see fuel in the venom fuel bottle. Thats a nono lol

eminentguitar

Hey i was just wondering if i can use this clutch on my amax (tsunami) or do i have to use the two gear clutch bell

http://www2.towerhobbies.com/cgi-bin...93p?&C=CMG&P=K

eminentguitar

sorry its this link

http://www2.towerhobbies.com/cgi-bin...?&I=LXVP66&P=K

twomanytoys

No that bell is too short. You would need a deeper bell. Look at HPi bells. Thats what is compatible.

eminentguitar

thanks man im new to this stuff

eminentguitar

do you know what the stock gears are on the clutch bell fo the amax cheetah

rclynx

HPI 77104 is what you want and if clermont doesn't have them I do

yes it is a vented 14 tooth.........I assumed that you wanted a 14 tooth because that was what you were showing in the othe thread

eminentguitar

thats the 14 tooth vented?