throttle servo?
#1
Member
Thread Starter
Join Date: Aug 2007
Location: Los angeles,
CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
throttle servo?
hi guys i have a problem with my tornado bb. i give in gas the throttle wont move but the steering works does, does that mean that i have a bad servo?
#3
Member
Thread Starter
Join Date: Aug 2007
Location: Los angeles,
CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
RE: throttle servo?
i opened the box and the conection on the on and off swith were off i tried to connect them back but it still would not work. what should i do?
#4
RE: throttle servo?
reverse the servo plugs on the reciever, see if the throttle works the steering and the steering works the throttle, if the throttle still doesnt work then the servo is shot.
#5
Senior Member
My Feedback: (1)
Join Date: Jun 2005
Location: Clermont, FL
Posts: 2,824
Likes: 0
Received 0 Likes
on
0 Posts
RE: throttle servo?
also just a note, there is a little grub screw that goes on the throttle linkage. Sometimes they are too tight and wont allow the servo horn to move. Alot of people tighten them up thinking it is a loose screw but that needs to be loose so it pivots. Just a thought.