Clermont Hobby's wheelie mod
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jun 2005
Location: Clermont, FL
Posts: 2,824
Likes: 0
Received 0 Likes
on
0 Posts
Clermont Hobby's wheelie mod
Here is my attempt on a wheelie with my avalanche using a stock redcat motor(that was modded also) with some other mods also... dont laugh http://media.putfile.com/redcat-wheelie
Should have entered the contest but wouldn't be fair so here is it.
Should have entered the contest but wouldn't be fair so here is it.
#13
Junior Member
Join Date: Feb 2008
Location: stewart, MN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
RE: Clermont Hobby's wheelie mod
If you guys want to wheelie some of the other models, learn to port and polish the motors. You will be amazed at the power you get. I did this to my Savage motors, Tmaxx's and others. With the savage you barely had to hit the throttle for the front end to come up!
#15
RE: Clermont Hobby's wheelie mod
round off the sharp edges on the sleeve and crank, add some fangs to the ports but you have to be careful, if you unbalance the crank the bearings will wear out in a couple of runs.
#21
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Jun 2005
Location: Clermont, FL
Posts: 2,824
Likes: 0
Received 0 Likes
on
0 Posts
RE: Clermont Hobby's wheelie mod
oh wait.. thats not a redcat haha just kidding. Post away. I know there are a ton of others out there that wheelie. I was just posting for the redcat people.
#23
Senior Member
Join Date: Oct 2007
Location: Simi Valley,
CA
Posts: 2,909
Likes: 0
Received 0 Likes
on
0 Posts
RE: Clermont Hobby's wheelie mod
ORIGINAL: ldgasp
what mods did you do to a stock car that made it evolve to walking on 2 wheels????????
what mods did you do to a stock car that made it evolve to walking on 2 wheels????????
#25
RE: Clermont Hobby's wheelie mod
Dennis, you are the MAN! Someone needs to post that in the Monster Truck Forum where They incessantly Rag on us folks with "cheap Chineese knock offs".
Im gonna have to port n polish one of my VX18 engines. I think we can get Legit wheelies out of a Volcano.
I have a Motor Saver, Ported n polished HPI header, and a Redcat tuned pipe. It wants to lift the front end, but wont QUITE do it. If I added a hi-stall clutch and a 10 tooth clutch bell, it might work. If I Ported n Polished the engine, I bet it would Wheelie!
Below is a picture of my ported HPI header. Before n after.
Im excited now! Im gonna order some parts from you tonight!
Im gonna have to port n polish one of my VX18 engines. I think we can get Legit wheelies out of a Volcano.
I have a Motor Saver, Ported n polished HPI header, and a Redcat tuned pipe. It wants to lift the front end, but wont QUITE do it. If I added a hi-stall clutch and a 10 tooth clutch bell, it might work. If I Ported n Polished the engine, I bet it would Wheelie!
Below is a picture of my ported HPI header. Before n after.
Im excited now! Im gonna order some parts from you tonight!