first time start up issue
#1
Junior Member
Thread Starter
Join Date: Jan 2008
Location: , OH
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
first time start up issue
hello i have a tsunami I cant seem to get the fuel primed to the carb i put my finger over the exhaust to no avail any tips would be appreciated.
#2
RE: first time start up issue
try taking the fuel line off the pipe and blow into it, make sure there is no clog in the tank. take the line off the carb to see if fuel is coming out.
#4
RE: first time start up issue
ORIGINAL: Boxhead from MN
What he (ehroof) said. That's what I do to prime mine. Haven't got a primer bulb yet. Just remember to blow out not suck in
What he (ehroof) said. That's what I do to prime mine. Haven't got a primer bulb yet. Just remember to blow out not suck in
Tru Tru. On the side of my bottles of Trinity Monster Hp Fuel it says "there is no know way to make this product safe for human consumption" ,lol
#6
Junior Member
Thread Starter
Join Date: Jan 2008
Location: , OH
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
RE: first time start up issue
Thanx ehroof I finally got my tsunami running today and it runs good.one crazy thing i found wrong from the factory the little metal nipple comin out of the tank was not drilled out from the factory.my cousin luckily had one from a spare car.i guess that explains why no fuel to the carb and we had to make a gasket for the tank lid to get it to seal.Not a big deal but was wondering if redcat would take care of that being that the car was new.