r\c justin

Hey guys,

i need to know where i can get rims and tires together in a pack!! i need them order and shipped by tomorrow!! I have heard the jato 2.2 but not sure i need to know for a fact what fits!!! Red Cat is always out of stock! hopeing getting my new motor and parts this week and also upgraded my lower control arms on my sv u have to have metric srews for the shocks not the standards that coming with the factory arm, what is the part number on them?


thanks

justin

r\c justin

Looks like i am going to order all my stuff from allaboutfunhobbies!!!!! still need to know what screw for the alum lower control arm front that goes to the shock and also the exhaust screw!!

chevyderek72

ok so im wanting to get some new tires and rims, and this is what im thinking either
these http://www.junfac.com/shop/index.php...roducts_id=197
or these http://www.junfac.com/shop/index.php...roducts_id=126
with the proline mashers. but there is 2 different ones,
these http://www3.towerhobbies.com/cgi-bin...?&I=LXUM93&P=7
and these http://www3.towerhobbies.com/cgi-bin...?&I=LXSTA5&P=7

the mashers are wider than the wheels but it looks good on the pictures though. and whats the difference in the mashers, they look the same and everything, and are they as tall as the stockers? i have the exceed stock ones. i dont know if they are the same as redcats. also with the wheels, the first one is 34mm wide and the second one is 42mm, would the 42mm fit better with the mashers or what. and also look the the offsets at the bottom, which one would fit better on my volcano.

chevyderek72

can i at least get the dimensions on the stock wheels

iamfoesho

You need to get either the 13mm or 19mm axle extenders that junfac carries to clear the hubs.

r\c justin

i got some hpi there pretty sweet need there street tires i got them for my volcano