Easy Way To Add Extra Strength To The Wheel Hubs
02-18-2010, 07:24 PM
#1
Easy Way To Add Extra Strength To The Wheel Hubs
Easy Way To Add Extra Strength To The Wheel Hubs
before they break, wrap the ends with elec. tape around the pins..
then take a zip tie and wrap it around the tape.
the tape and zip tie will allow flexibility and keep from going so far it breaks.
since doing this i have not broke a single hub.
trim the elec tape so it is flush with the end of the hub
you can use a black zip tie so it blends, you can also put the lock on the under side and it will never be seen, i did it this way for the pic so you all could see what was what.
before they break, wrap the ends with elec. tape around the pins..
then take a zip tie and wrap it around the tape.
the tape and zip tie will allow flexibility and keep from going so far it breaks.
since doing this i have not broke a single hub.
trim the elec tape so it is flush with the end of the hub
you can use a black zip tie so it blends, you can also put the lock on the under side and it will never be seen, i did it this way for the pic so you all could see what was what.
02-18-2010, 08:34 PM
#3
RE: Easy Way To Add Extra Strength To The Wheel Hubs
those are so expensive.
im going to wait a bit till more people make them and the price drops a little.
i am going to make steel a arms.
funny thing i was doing donuts in the house with my jato 2.5
[ i know nitro in the house???]
yes............ hahaha
any how i railed it into the cubbords are full speed during a donut with only 1 front wheel, i thought to myself oh no there goes the wheel and i have no spare parts,,,,,
well nope it held strong....
even after 2 more hits the same way
im going to wait a bit till more people make them and the price drops a little.
i am going to make steel a arms.
funny thing i was doing donuts in the house with my jato 2.5
[ i know nitro in the house???]
yes............ hahaha
any how i railed it into the cubbords are full speed during a donut with only 1 front wheel, i thought to myself oh no there goes the wheel and i have no spare parts,,,,,
well nope it held strong....
even after 2 more hits the same way
02-19-2010, 11:35 AM
#4
Member
Join Date: Jan 2010
Location: Erie, IL
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
RE: Easy Way To Add Extra Strength To The Wheel Hubs
Running a nitro in the house is just plain dumb. If your gonna bring something like this up, you need to explain the dangers so some young kid doesn't think it's alright. Breathing the exhaust is terrible for you and the fire hazard should go without saying.
02-20-2010, 10:21 AM
#5
RE: Easy Way To Add Extra Strength To The Wheel Hubs
well i know this, i didnt say for anyone else to do it.
i opened the windows in the kitchen and put a big fan in the window so i didnt breath the fumes in.
and i only ran it for under 3-4 minutes.
it was my jato i bought NON running and i got it running and a quick test in the house.
and its not "JUST PLAIN DUMB"
if you are smart like me and do a proper set up first
yes it you run one in the house on carpet for a long time and fill your house with smoke yes that dumb.
NOTHING I DO IS DUMB.
i opened the windows in the kitchen and put a big fan in the window so i didnt breath the fumes in.
and i only ran it for under 3-4 minutes.
it was my jato i bought NON running and i got it running and a quick test in the house.
and its not "JUST PLAIN DUMB"
if you are smart like me and do a proper set up first
yes it you run one in the house on carpet for a long time and fill your house with smoke yes that dumb.
NOTHING I DO IS DUMB.
02-21-2010, 04:29 PM
#6
Member
Join Date: Jan 2010
Location: Erie, IL
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
RE: Easy Way To Add Extra Strength To The Wheel Hubs
I might have believed that nothing you do is dumb until you ran your nitro rc in your house. And told people about it. That kinda speaks for itself.
02-23-2010, 02:30 PM
#8
RE: Easy Way To Add Extra Strength To The Wheel Hubs
ORIGINAL: tylerjackson
I take it by all the misspelled middle school vocabulary that you are a younger kid, am i correct?
I take it by all the misspelled middle school vocabulary that you are a younger kid, am i correct?
DONT BOTHER ME WITH SPELLING AND PROPER ENGLISH BECAUSE I DO NOT CARE IN THE LEAST
and no im not a little kid.
dont start your crap with me
i hate it when tiny little punks talk trash on the web, they know they would not do it in real life to someone like me who would squash them like a bug
