Notices
Redcat Racing Support Moderated Support Forum for all Redcat Racing Cars, Trucks & Buggies

Can't Start my Lightning

Old 08-22-2010, 10:33 PM
  #1  
newbienitro
Junior Member
Thread Starter
 
Join Date: Aug 2010
Location: , NY
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Can't Start my Lightning

Hello..Im new to nitro and was given a new redcat lightning nitro as a gift. After following all of the directions, I got the car started but the throttle was way off so I shut it down. Now it wont start at all. Any suggestions? The glow plugis fine and theengine is primed...Thanks
Old 08-22-2010, 10:40 PM
  #2  
JDUBTOYS
Junior Member
 
Join Date: Jul 2010
Location: Bremerton, WA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Can't Start my Lightning

Checkout the tuning videos on my site.I hope this helps!!
Old 08-22-2010, 11:48 PM
  #3  
UrcHobby
My Feedback: (2)
 
UrcHobby's Avatar
 
Join Date: Nov 2002
Location: Bellmore, NY
Posts: 337
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Can't Start my Lightning

Take the air cleaner off and look down the carb opening with the cars rec and radio turned on, make sure you have a 1mm gap or crescent in the carb opening. The carb should not be fully closed or the motor will not get any air. Also did you turn any of the needles on the carb?
Old 08-23-2010, 09:41 AM
  #4  
cswtornado
Senior Member
 
cswtornado's Avatar
 
Join Date: Jul 2009
Location: F-------, ME
Posts: 450
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Can't Start my Lightning

First watch the tutorial videos for tuning and BREAKING IN THE CAR!!!!!on the redcat site or jubtoys site. Then break in the car (or that engine will never ever run to its full potential). You don't need it to run fast or performancy, just rich. Break it in before worrying about the high speed needle or anything. So just to get it started, mess with the idle screw. I'm sorry for that answer but with the details provided I cant really give anything better.

Note - The idle screw controls the opening in the carb when the engine is idling. AsUrcHobby said, turn the idle screw until your gap is 1 mm then try to start it from there.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.