Part #'s help please
 

I'm not sure about a couple of part #'s, can someone please help.

Tornado S30

I need the hinge pin that holds thefront lower armto theFront Differential Gearbox housing. The schematic doesn't really show it. It looks like part #6060 but that shows upper arm and #2063 shows rear so that leaves #2036 that I found on a parts search on a website but not on the schematic.

I also need the screw that holds the front shock to the lower arm.

These cars really don't like curbs. Something about the speed vs cement. The car is amazingly fast which adds to the damage factor.

RE: Part #'s help please
 

#02036 should be the correct part. http://www.redcatracing.com/RC-Cars/Redcat-Parts/02036
those parts are pretty cheap tho. might be worth it to buy #02036 and 02063. that will make certain you get what you need for your repair, and youll have some spare parts on hand for the next time you hit a curb:) Rc's with small diameter wheels and a small bumper dont usually fair well against a curb. the pic i uploaded shows my tornado epx(electric version) with a RPM traxxas rustler bumper on it. mounted right upto the stock bolt holes for the stock bumper! should work the same on the nitro version. will help protect the front end.

as for the lower screw to hold the shock on the lower arm, measure the other one. parts like screws are sold in small lots according to size and head type.

RE: Part #'s help please
 

http://www.urchobby.com/proddetail.p...036&cat=21

http://www.urchobby.com/proddetail.php?prod=06060

http://www.urchobby.com/proddetail.p...063&cat=21


Don't know............... Call Kurt he is probably stocking Redcat parts right now he may have on stock what you need..................

RE: Part #'s help please
 

In case anyone needs this information in the future:

The front lower arm hinge pin is part # 2036

The screw that holds the shock to the lower arm is part #2088