RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Redcat Racing Support (http://www.rcuniverse.com/forum/redcat-racing-support-427/)
-   -   Stock needle settings for Tornado Engine (http://www.rcuniverse.com/forum/redcat-racing-support-427/11213162-stock-needle-settings-tornado-engine.html)

JohnP2 08-31-2012 07:02 PM
Stock needle settings for Tornado Engine
 
See this post. I think it is an SH .18. Many thanks!

micah11 08-31-2012 07:32 PM
RE: Stock needle settings for Tornado Engine
 
The stock needle settings are <span style="font-family: Verdana, Arial; font-size: 13px; background-color: rgb(251, 252, 255); ">2.5-3 turns out from fully closed on the high and low speed needles. the idle screw should be set so the carb is open about 1mm. Hope this helps</span>

JohnP2 08-31-2012 08:37 PM
RE: Stock needle settings for Tornado Engine
 

Quote:
ORIGINAL: micah11

The stock needle settings are<span style="background-color: rgb(251,252,255); font-family: Verdana, Arial; font-size: 13px">2.5-3 turns out from fully closed on the high and low speed needles. the idle screw should be set so the carb is open about 1mm. Hope this helps</span>
This helps tremendously. Thank you so much!


All times are GMT -8. The time now is 09:46 AM.