RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Redcat Racing Support (http://www.rcuniverse.com/forum/redcat-racing-support-427/)
-   -   Tornado EPX shock removal (http://www.rcuniverse.com/forum/redcat-racing-support-427/11225426-tornado-epx-shock-removal.html)

davidgp 09-11-2012 02:24 PM

Tornado EPX shock removal
 
The lower shock mounts are pins pressed through the lower control arm. How can I remove them? Should I drill out the pin and later replace it with a nut and bolt? One of my shocks has a bent shaft and needs tbe fixed or replaced.

nitrosportsandrunner 09-11-2012 02:39 PM

RE: Tornado EPX shock removal
 

Quote:

ORIGINAL: davidgp

The lower shock mounts are pins pressed through the lower control arm. How can I remove them? Should I drill out the pin and later replace it with a nut and bolt? One of my shocks has a bent shaft and needs tbe fixed or replaced.
the pin is a screw, and it has a hex head. should be a 1.5mm. If you have a 1.5mm hex (L) wrench or a 1.5mm hex driver then you put it in and just unscrew it.


All times are GMT -8. The time now is 02:13 AM.