RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Redcat Racing Support (http://www.rcuniverse.com/forum/redcat-racing-support-427/)
-   -   Air bubbles coming from carb?????? HELP???? (http://www.rcuniverse.com/forum/redcat-racing-support-427/11524731-air-bubbles-coming-carb-help.html)

GregoryB76 06-02-2013 03:57 PM

RE: Air bubbles coming from carb?????? HELP????
 

Quote:

ORIGINAL: justinteoc1



I see there is several sh 28 engines for sale on ebay that are from outside the country has anyone had any experience with buying something out of the country the guy has good feedback but i just wanted a second opinion and im not really worried about the ship time it will give me time to get the drivetrain in great condition.
Also is there a way to measure the pinch of a piston and sleeve i removed mine and when its cold it will not push out the top of the sleeve but it is about 1/16 of an inch from being flush with the sleeve. Is this normal or should it not go that far. Im just curious about when its hot cause when it gets hot the engine becomes very easy to turn over</p>
yes.i have got several sh 28 off ebay if you can get a p6 or a p8 but the p3 is good to
i have ran all of them p8 is the fast one.about every car and truck I have has sh on it
losi 454 is a p8
p3 are like 98.00 bucks on ebay
<br type="_moz" />

justinteoc1 06-02-2013 06:51 PM

RE: Air bubbles coming from carb?????? HELP????
 
How do you tell the difference in p3 p6 or p8 ive never noticed any of that?

justinteoc1 06-02-2013 06:53 PM

RE: Air bubbles coming from carb?????? HELP????
 
ok i see now thats the m3 at the end of it ha i am just now noticing that i didnt know there were different ones.

justinteoc1 06-03-2013 05:45 PM

RE: Air bubbles coming from carb?????? HELP????
 
if i purchase one of the p6 or p8 engines will i be able to put my pull start on it or do i have to use the roto start

GregoryB76 06-04-2013 04:26 AM

RE: Air bubbles coming from carb?????? HELP????
 
<div>Yes</div>Just DO NOT get a bump start one .you can get them with a pull start on them


All times are GMT -8. The time now is 01:24 PM.