RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Redcat Racing Support (http://www.rcuniverse.com/forum/redcat-racing-support-427/)
-   -   Pull start problem (http://www.rcuniverse.com/forum/redcat-racing-support-427/11592506-pull-start-problem.html)

Madhd 01-02-2014 08:10 PM

Pull start problem
this is my first post...I got a Volcano s30 for x-mass i started the break-in procedure on the truck and after the 2nd tank of fuel my pull starter wont engage anymore so i cant start it....i did read something about a one way bearing that is slipping....could it be fried just after 2 tanks of fuel?
could use some guidance.


zackS30 01-03-2014 09:12 PM

When ever u use a pilull starter u need to only pull it out 6-8inches any more can damage the spring or throw outthat one way bearing.
What u could do is take it off and try to see if can tell whathappen and maybe fix it or, just attach the part that tirns the crank to a drill and do it that way. Ive seen alot of people do that.

Sorry about the bad luck. Ive got a tornado s30 and fortunatly havent had pull start problems. But I had watched video on youtube by alishanmao about how to do everything.

All times are GMT -8. The time now is 01:21 AM.