brake screws
I just had to take apart my entire car to replace a part, on reassembly I find that if the bolts that screw the brake calliper down are too tight the wheels wont' spin at all, but if I loosen it up the arm moves a little too much and the brake calipers rattle. Is there a solution to this??? Any help would be appreciated.
|
RE: brake screws
I have took apart my redcat lighting vx you have to find the sweet spot. just tighten till it can wiggle like 1/16th of a inch also when you have it in its loose spot pull back on the arm and see if it tightens up well
|
RE: brake screws
Thanks I'll give that a try!
|
RE: brake screws
cool let me know if it helped
|
RE: brake screws
Yes it helped, thanks a bunch
|
RE: brake screws
i have a lightin vx and the brake keep locking up so i put spings between the pads on the two screws and hey they work fine.
|
RE: brake screws
Excellent idea justin,gunna borrow that if ya dont mind :D . Now I just gotta figure a way to keep it completely centered cause it bothers me how it just floats freely on the universal output like that...
|
All times are GMT -8. The time now is 02:23 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.