RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Redcat Racing Support (http://www.rcuniverse.com/forum/redcat-racing-support-427/)
-   -   Redcat vehicle repair/tune FAQ (http://www.rcuniverse.com/forum/redcat-racing-support-427/4207842-redcat-vehicle-repair-tune-faq.html)

blusls 06-23-2012 05:34 AM

RE: Redcat vehicle repair/tune FAQ
 
I have not used those exact ones. But they look like they are screw on.

juna1103 06-25-2012 05:45 AM

RE: Redcat vehicle repair/tune FAQ
 
Thanks for the reply, i was thinking maybe using the shock ball mount as the screws, I will post a picture.. of how it looks

warner79 03-04-2017 11:12 PM

ok cant figure out my lsn i do pinch test get it in sweet spot...but needle is only turned out 1/4 turn from closed. I have put both hsn and lsn back to factory and just dumps oil out of it.

jdub_white 03-23-2017 04:51 PM

Woops I posted wrong place so I had to edit. Sorry I am new.

sblac00w 04-03-2017 11:16 AM

Good day. I am trying to install a 2 speed clutch bell for the 2 speed transmission. This will be our 2nd one. On the first one we just switched the bearings and put all back together and it works fine. On the 2nd one after installing the bearings and bolting back down the clutch will not turn. I made sure all the correct washers were in place. I took it back apart and tried again. The clutch will not turn. If I put old 1 speed back on it works fine. spins freely like it should. Any ideas on what I am doing wrong? Or did I just get a bad part?


All times are GMT -8. The time now is 06:20 PM.