Redcat Racing Volcano Thread
 

This is a folder for all posts that have to do with the volcano. Please only post questions, problems, or add on's that relate to the volcano's.

RE: Redcat Racing Volcano Thread
 

what do you mean by add-ons do you mean hop-ups

RE: Redcat Racing Volcano Thread
 

a picture of my volcano:

1: upgrade your clutchbell to a single speed hpi : http://www.clermontmotorsports.com/s.../Detail?no=200 or this place: http://www2.towerhobbies.com/cgi-bin...?&I=LXLST9&P=7

2: upgrade your clutch spring to traxxas #4146x, use the spring not the shoes: http://www2.towerhobbies.com/cgi-bin...=++&search3=Go

RE: Redcat Racing Volcano Thread
 

here is my volcano stx by redcat it has futaba ph radio 3003 steering servo 3010 throttle servo , venom failsafe unit , venom hump batterie for receiver and venom AA batteries for transmitter , 16 tooth hpi vented racing clutch bell with bearings , traxx 4146 hi stall clutch spring , duratrax lightened and vented purple flywheel #DTXC7703 , hotbodies purple t-maxx shocks #25000 , aluminum steering arms and door mounts , aluminum rear axle holders , aluminum frount and rear lower arms , aluminum hexes , hpi 2.2 spike rims with proline masher 2000 tires , dynimite fuel filter , t bone frount bumper and it runs on odonells 20% nitro

RE: Redcat Racing Volcano Thread
 

Heres my volcano stx and it might be gone this coming wednesday.I believe I am trading it for a stampede.It has been good to me but i am wanting an electric car now.

http://img1.putfile.com/thumb/1/2719134455.jpg
http://img1.putfile.com/thumb/1/2719134463.jpg
http://img1.putfile.com/thumb/1/2719134437.jpg
http://img1.putfile.com/thumb/1/2719134445.jpg
http://img1.putfile.com/thumb/1/2719134464.jpg
http://img1.putfile.com/thumb/1/2719134397.jpg
http://img1.putfile.com/thumb/1/2719134335.jpg

RE: Redcat Racing Volcano Thread
 

Where are the light's man[8D] Cant see anything:D

RE: Redcat Racing Volcano Thread
 

can someone please post a pic of the aluminum rear axle holder. i have been wondering for some time what they look like and have not been able to find any pics

RE: Redcat Racing Volcano Thread
 

rear axle holders i used screws to hold the axle pin that goes throw the arm im going to run a long scew throw the lower arm and axle holder with a locknut or mabe a pin with e clips what do you guy think,because dirt get in that set scew hole and its a pane to get at

RE: Redcat Racing Volcano Thread
 

what are part #02134 used for? is it to secure the wheel to the axle or does it replace the silver aluminum nut behind the wheel?
this is one other thing i have been wondering for a while

RE: Redcat Racing Volcano Thread
 

[size=7][size=6][size=3]Hey guys how much does a hispeed radio control and all the servos cost ? Because im sellin one rite now on the buy and sell under radio accesories!!
-----------------------------------------------------------[img]
Volcano stx,and all the rest are stock parts for now soon too upgrade too a faster truck!!!

RE: Redcat Racing Volcano Thread
 

it will cost more to ship it than what its worth

RE: Redcat Racing Volcano Thread
 

ya, like he said there not worth more than the shipping there really throw away radios.

RE: Redcat Racing Volcano Thread
 

Where is the clutch spring go i look for it and cannot find it

RE: Redcat Racing Volcano Thread
 

right here is the link with pics first post http://www.rcuniverse.com/forum/m_4207842/tm.htm

RE: Redcat Racing Volcano Thread
 

Can we state in here what wheels do fit the Volcano?

RE: Redcat Racing Volcano Thread
 

Yes you can

RE: Redcat Racing Volcano Thread
 

I can't ... because I do not know well enough ;) and in fact I am looking to get wheels for mine and wondered which one's do fit?

I do know our hex is 12mm, right? And then they are 2.2" wide? What is the diameter?

RE: Redcat Racing Volcano Thread
 

the 12mm hex is correct, i really dont know the specifics of the stock tires. I use traxxas rustler rear rims, 4 of them. you may have to do a little trimming on the rims to make them fit, i have the stx and someone got some rims that were no good on the sv. The hpi 5 spoke seem to fit, these ones: http://www2.towerhobbies.com/cgi-bin...p?&I=LXM876&P=

RE: Redcat Racing Volcano Thread
 

what tires to go with it?;)

RE: Redcat Racing Volcano Thread
 

any 2.2 truck tire: http://www2.towerhobbies.com/cgi-bin...P?&C=CJE&V=PRO

RE: Redcat Racing Volcano Thread
 

http://www2.towerhobbies.com/cgi-bin...p?&I=LXLN12&P= this is what i like can i put these on volcano stock rims

RE: Redcat Racing Volcano Thread
 

no, the volcano rims are taller more like a jato rim (2.8 but dont hold me to that) i dont think you can get tires except for the redcat replacement for the stock volcano rims

RE: Redcat Racing Volcano Thread
 

Ya you can put T-maxx tires on them BUTTTT the T-maxx tires rub on everything when you turn, lol. Jato tires should fit. I've got a set of Jato Tires I was thinking about putting on my Volcano, but I haven't done it. Eyeballing it looks like it might fit fine.

RE: Redcat Racing Volcano Thread
 

jato tires do fit but with the 2.8 rim there is not much of a choice of tires.

RE: Redcat Racing Volcano Thread
 

www.imexrc.com[link=http://imexrc.com/SearchResult.aspx?CategoryID=3]http://imexrc.com/SearchResult.aspx?CategoryID=3[/link]

Check it out, We will be carrying most of these tires and a about 25% of everything else listed on the site in a month or so. The prices are high on the Imex site because they prefer people to buy from there dealers, but check it out anyway way cool tires and rims.

RE: Redcat Racing Volcano Thread
 

good, i am tired of the anocanda or the victory tires from traxxas, the victory tires wore dowm on my jato 2.5r before i was finished with the break in, the anocanda's on the 3.3 seem to last longer

RE: Redcat Racing Volcano Thread
 

My Anacondas Blow no really with the 3.3 its to much power they balloned until they exploded it was cool and crazy

RE: Redcat Racing Volcano Thread
 

So what size are our stock wheels? Are they 2.8?

I'd like to maintain the wheel/rim size and as I think it looks good, will these wheels on this page work as replacements? http://imexrc.com/SearchResult.aspx?CategoryID=4

Also, does anyone have a link to wheel hub adapaters? You know from our 12mm to say a 14mm?

RE: Redcat Racing Volcano Thread
 

any jato rear will work. the jato tires mount differently than the regular tires, they slip into a groove from the side not from the top

RE: Redcat Racing Volcano Thread
 

ehroof, when you say they mount differently ... you mean the tires to the wheels, right?

I've never had them seperated to see how they mount up.

Will this pose a problem in re-using the stock tires?

Before I go too far with wanting them, does anyone have a link or know where I can get a 12mm to 14mm hub adapter?

RE: Redcat Racing Volcano Thread
 

the tire mounts to the wheel differently with the jato. you couldnt use jato tires with the stock volcano rims. I dont think they make 12/14mm adapters. i only know of 14/17 and 17/23

RE: Redcat Racing Volcano Thread
 

Okay, I guess that answers that ;-) so I can't get Jato rims for my truck :(

Does anyone have the stock Volcano SV rims available or does anyone on here have a set they would sell?

RE: Redcat Racing Volcano Thread
 

you can get jato rims, they will fit but you need to get jato tires too

RE: Redcat Racing Volcano Thread
 

Ohhh, okay :D and then I would need to find Jato (rears) with a 12mm hex as well?

Thanks!

RE: Redcat Racing Volcano Thread
 

Jato rear rims are 12mm hex, you would need 4 rear rims and 4 tires

RE: Redcat Racing Volcano Thread
 

All Jato? Well maybe this website has it listed wrong - http://imexrc.com/detail.aspx?ID=588

RE: Redcat Racing Volcano Thread
 

the 2 jatos i have, the traxxas rims mount the tires differently than other ones, they mount from the side.

RE: Redcat Racing Volcano Thread
 

Glad to see a volcano thread only. I want to buy some spare glow plugs for my vertex .18 engine. The plug that came out of it appears to read y3. The guy at hobbytown sold me a Mccoy mc59. When I matched it up to the one that came in the engine, it has much longer threads. I'm thinking it will strike the top of the piston if I use it. One thread said to use OS A3. A little help will be greatly appreciated.
Many thanks in advance. Sure will be glad when weather clears so I can run my truck!



Redcat Volcano Sv .18 vertex

RE: Redcat Racing Volcano Thread
 

os a3 is a good plug for this motor is a hot plug, the lower the number the hotter the plug, i dont know about the mccoy plugs

RE: Redcat Racing Volcano Thread
 

what is the best manifold you can get for volcano stx;)i would like to know