RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Redcat Racing Support (http://www.rcuniverse.com/forum/redcat-racing-support-427/)
-   -   Redcat Racing Tornado Thread (http://www.rcuniverse.com/forum/redcat-racing-support-427/5342050-redcat-racing-tornado-thread.html)

dclintonh 02-10-2007 08:08 PM

RE: Redcat Racing Tornado Thread
 
is that clutch set up better than the stiff regular spring?

ehroof 02-10-2007 08:10 PM

RE: Redcat Racing Tornado Thread
 
its better since you dont need a spring but the clutch will not engage until a much higher rpm, more than the 4146x. My son didnt like it so i put the aluminum stock shoes back on and put the 4146x spring back on.

frekbynature2002 02-10-2007 08:53 PM

RE: Redcat Racing Tornado Thread
 
I got the clutch to work. Now I just need to find the 2 throttle gears. I looked at the pinon gears, and you can see where the throttle gears are taken the color of the tips. The throttle gears are bad also anyway. These factory parts seem really cheap.


WOULD THIS BE THE ONE
http://www2.towerhobbies.com/cgi-bin...?&I=LXCLR6&P=M
and
http://www2.towerhobbies.com/cgi-bin...?&I=LXCLR7&P=M

ehroof 02-10-2007 08:55 PM

RE: Redcat Racing Tornado Thread
 
they are good once you have a good clutch bell, i havent stripped any since i put the new bells on my redcats

ehroof 02-10-2007 09:26 PM

RE: Redcat Racing Tornado Thread
 

Quote:

ORIGINAL: frekbynature2002

I got the clutch to work. Now I just need to find the 2 throttle gears. I looked at the pinon gears, and you can see where the throttle gears are taken the color of the tips. The throttle gears are bad also anyway. These factory parts seem really cheap.


WOULD THIS BE THE ONE
http://www2.towerhobbies.com/cgi-bin...?&I=LXCLR6&P=M
and
http://www2.towerhobbies.com/cgi-bin...?&I=LXCLR7&P=M
nope, the redcats 2 speed are 5 teeth in difference

frekbynature2002 02-10-2007 09:43 PM

RE: Redcat Racing Tornado Thread
 
ok, Ill just get the assemblies from them. Their only an 1hr away anyway

TORNADO BB 02-11-2007 11:38 AM

RE: Redcat Racing Tornado Thread
 
i have the duratrax temp gun and where should i point at

ehroof 02-11-2007 12:13 PM

RE: Redcat Racing Tornado Thread
 
glow plug

TORNADO BB 02-11-2007 10:49 PM

RE: Redcat Racing Tornado Thread
 
thx

ehroof 02-12-2007 07:09 AM

RE: Redcat Racing Tornado Thread
 
your welcome, temp guns are good but dont tune to temprature, tune until it runs great then check the temp, from 230 to 270 is good

bad630 02-13-2007 01:42 AM

RE: Redcat Racing Tornado Thread
 
How do I remove the flywheel can't figure it out new to nitro motors?I know you guys can help great furum been reading scents Nov.


Xp,E-maxx,L-4 oval,Hyprodrive 510 oval,

ehroof 02-13-2007 07:25 AM

RE: Redcat Racing Tornado Thread
 
easily pry it from behind, you have to take the nut off the center shaft first. I put some electrical take around the flat head of a screwdriver and put it in the exhaust outlet of the engine to keep the piston in place, be very careful since you dont want to nick the piston.

TORNADO BB 02-13-2007 10:15 PM

RE: Redcat Racing Tornado Thread
 
what rear exhaust fits the torndo

ehroof 02-14-2007 07:36 AM

RE: Redcat Racing Tornado Thread
 
i think someone posted that the one for the rustler fits, i dont know 100%, if you find one you like, post a link or picture so we can check it out.

123michael 02-14-2007 08:16 AM

RE: Redcat Racing Tornado Thread
 
none i dont think

123michael 02-14-2007 08:22 AM

RE: Redcat Racing Tornado Thread
 
http://www.tsais.com/ look rear egsausts but these wnt fit sorry-have alook around and tell us what you like

123michael 02-14-2007 08:30 AM

RE: Redcat Racing Tornado Thread
 
http://www.tsais.com/gallery/costas/index.html look at this these are custom pipes and you could have these mabie they look a bit daft to me though custom pipe just get cool side but its up to you.

TORNADO BB 02-14-2007 08:11 PM

RE: Redcat Racing Tornado Thread
 
how bout the first one http://www.tsais.com/products/exhaus.../10/index.html

slide150 02-14-2007 10:42 PM

RE: Redcat Racing Tornado Thread
 
do yall think this can be cut to fit the tornado

[link]http://us.st11.yimg.com/us.st.yimg.com/I/raidentech168_1933_83531234[/link]

slide150 02-15-2007 05:42 PM

RE: Redcat Racing Tornado Thread
 
disreguard my last post i just found out that redcat racing sells a clear body on thier site its part number 06027

edaslan 02-15-2007 08:09 PM

RE: Redcat Racing Tornado Thread
 
hi guys
my xp start and the rpm is realy high and i dont know how to adjast it i lost my book please help me

dclintonh 02-15-2007 08:22 PM

RE: Redcat Racing Tornado Thread
 
if it just started to be fast adj your throttal trim on the radio.

if that isnt ittake the air filter off and turn that little screw under the intakethat closes the opening.

the book is useless, your not missing much

edaslan 02-15-2007 08:23 PM

RE: Redcat Racing Tornado Thread
 
any body knows how can i return my xp engine to factory setting
please let me know

nitrospeed33 02-15-2007 08:35 PM

RE: Redcat Racing Tornado Thread
 
for the lowspeed needle, go flush with the collar, which means that the screw should be totally even with the little plastic peice around it. aslo its 2 1/2 turns out on the high speed, and im not too sure on the idel, sorry.

glk420247 02-15-2007 08:36 PM

RE: Redcat Racing Tornado Thread
 
idle is about 1mm open.


All times are GMT -8. The time now is 09:55 AM.