RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   Redcat Racing Support (http://www.rcuniverse.com/forum/redcat-racing-support-427/)
-   -   Monsoon XTR Conversion (http://www.rcuniverse.com/forum/redcat-racing-support-427/9639110-monsoon-xtr-conversion.html)

jigawatt 04-24-2010 11:26 PM

RE: Monsoon XTR Conversion
 
I've looked over every other company's version and have found no such luck.

Mickstix 04-25-2010 01:51 AM

RE: Monsoon XTR Conversion
 
I think if I was wanting to convert now, I'd just get a motor mount "conversion" for an ST-R and fabricate the rest with off the shelf battery tray, use my stock servo mount and cut it in half (It's still good, if ya wanted to covert back,as it bolts to the chassis at numberous spots for each servo) then either just mount the esc ontop of the servo mount, or get a small piece of aluminum stock from HomeDepot and cut a little extension to bolt onto the top of the center diff housing, to stick the esc/rx/ ect. (basically just like the Riverhobby kit shows) And it'd all be alot cheaper than the RiverHobby "kit" as well.. :)

jigawatt 04-29-2010 01:02 PM

RE: Monsoon XTR Conversion
 
I think that's what I'm stuck with doing for now. Of course with the luck I have, you'll see a conversion kit soon as I finish mine :eek:

romancho161 10-17-2012 02:04 AM

RE: Monsoon XTR Conversion
 
Hi guys!<div>Who ever got the conversion for monsoon Xtr? have you seen this http://www.youtube.com/watch?v=G3bB3kWrVas&amp;feature=channel&amp;list=U L</div>

romancho161 10-17-2012 02:07 AM

RE: Monsoon XTR Conversion
 
Who else is interested in this topic?


All times are GMT -8. The time now is 11:39 AM.