Where to find square pvc?
Anyone know some place in my area I can buy square pvc gutter (smooth sided 2 1/2" or 3")? Every where I've looked only has the fluted rectangular type.:eek:
|
RE: Where to find square pvc?
Tru Value and Ace hardware have been my sources here. Also, there is a "Do it Yourself "???? hardware chain whose members are often found stocking the material. Rich
|
RE: Where to find square pvc?
Hi hugger-4641 and others.
I have 4 different SPADS and none use the square PVC downspouts. J3-Cub, Canard, Twin Tail, and Biplane, all using OS46FX or AX engines. I use 1" aluminum square tubing and/or 3/4" aluminum angle from Loew's. |
RE: Where to find square pvc?
Thanks for the response guys! I hadn't thought of aluminum, I'll definitely try that on my next one.;) But for now I'd like to build a something similar to my Demon, exept with a longer tail and wingspan. The one I'm flying now has as 32" fuse and 48" wingspan and I think it was actually built with combat flying in mind. I think I'd like to try the same design and air foil, but maybe a 60" wingspan and 50" fuse. Looking for just a little more pitch stability and doing pattern type flying with it.
Thanks for the Ace hardware suggestion. I think there is still an Ace hardware in Jackson, the Ace and Tru Value here in McKenzie closed a few years ago.:eek: But you lost me on the "Do It Yourself" hardware, not sure what that is. |
RE: Where to find square pvc?
Try this...they may, or may not...have a franchise/branch/location in your area. Rich
http://doitbest.com/ |
RE: Where to find square pvc?
Hey thanks! :DTwo locations within 20 minutes, I'm sure if they don't have it in stock, one of them can probably order it for me.;)
|
RE: Where to find square pvc?
Hey Hugger, I looked all over the place here and finally found two pieces left at an out of the way Ace Hardware and paid $9 and change a piece for them..... then I just *happened* to wander into a Marvin's Building Materials about 3 blocks from our flying field and they stock the entire line of the white PVC gutter system including the 2 1/2" downspout. They had about 20 pieces in the bin for $6 and something. [:'(] You might check and see if there's one in your area if the others don't work out: http://www.marvinsbuildingmaterials.com/<div>
</div><div> </div> |
RE: Where to find square pvc?
If you have an Agway near by they can order it
|
All times are GMT -8. The time now is 06:30 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.