Hirobo Bell 47G Gaser
#1
Senior Member
Thread Starter
My Feedback: (3)
Join Date: Nov 2002
Location: Rahway,
NJ
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
Hirobo Bell 47G Gaser
Does anyone have any parts sitting around for the original Bell 47G that Hirobo put out in the 80's I can use a main shaft and main gear if you have one or two
Thanks and let me know guys..........
Thanks and let me know guys..........
#3
My Feedback: (50)
the main shaft can be duplicated easily just measure diameter and length,
then look up stock drives on the web and see the hardened precision shafts, match diameter and length as close as you can
the straightness and shaft diameter are perfect you would want the +0mm spec if for example the main shaft was 10mm
you would get the 10.0 mm 10mm+0 shaft.
the holes can be drilled by a local machinist with a solid carbide drill bit
i make my own main shafts all the time.
then look up stock drives on the web and see the hardened precision shafts, match diameter and length as close as you can
the straightness and shaft diameter are perfect you would want the +0mm spec if for example the main shaft was 10mm
you would get the 10.0 mm 10mm+0 shaft.
the holes can be drilled by a local machinist with a solid carbide drill bit
i make my own main shafts all the time.
#5
Junior Member
Join Date: May 2010
Location: Stedman, NC
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I still have it,as for specifics has all the original componets from the late 1980's decked out as a army scout helicopter if you want pictures can be arranged.......
#6
Member
Join Date: Sep 2002
Location: Johnson City,
TN
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Macnasty, if you are interested in selling please provide selling price, pictures and model and manufacturer
#8
Member
Join Date: Sep 2002
Location: Johnson City,
TN
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Macnasty, a few questions if you please: Is the copter built, partially built, flown, crashed, does it include the engine or has it been run and includes all other necessary hardware and assembly manual.
How are the photos coming?
How are the photos coming?
#14
Member
Join Date: Sep 2002
Location: Johnson City,
TN
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Macnasty, I have studied the photos very carefully and while I appreciate your patience in this matter, I think your asking price is too high given the overall condition that's indicated in the photos, my counter offer is very much less than your price so I won't insult you by submitting one,...thanks again
nav-air
nav-air