Century's New Scale Helicopter/Fuselage Kits
 

[size=2]CENTURY Airwolf .50 Size Helicopter Kit
[link=http://www.centuryheli.com/products/helikits/cn1080aairwolf/index.htm?currentid=318]http://www.centuryheli.com/products/...ages/title.gif
http://www.centuryheli.com/products/...s/main_350.jpg[/link]
SPECIFICATIONS:
Length: 53"
Height: 10.5"
Main Rotor Length: 600mm
Tail Rotor Length: 95mm
Engine: .50
Weight: 8-9 lbs
Color: Black

Detailed scale Airwolf fuselage from the popular television series of the '80s. Fuselage comes with Funkey's highest quality fiberglass parts , horizontal & vertical fins, the entire body is painted in charcoal metallic & white fuel proof paint. Fiberglass machine guns and open pods, open engine intake with grill installed, retracts and wheels. Inside are the best selling pre-built Hawk mechanics with 29 Ball Bearing and Hawk SE metal side frames. Available as ARF or Kit form. Just install engine and radio equipment and go fly. Perfect gift and an excellent scale helicopter project. Scale muffler, Engine, gyro & Radios are not included.

[link=http://www.centuryheli.com/products/helikits/cn1080aairwolf/index.htm?currentid=318]http://www.centuryheli.com/images/more_info.gif[/link] [/font]



[size=2]CENTURY 222 .50 Size Helicopter Kit
[link=http://www.centuryheli.com/products/helikits/CN1081Bell222/index.html?currentid=315]http://www.centuryheli.com/products/...kitoverall.jpghttp://www.centuryheli.com/products/...kitoverall.jpg[/LINK]
SPECIFICATIONS:
Length: 53"
Height: 10.5"
Main Rotor Length: 600mm
Tail Rotor Length: 95mm
Engine: .50
Weight:8-9 LBS

Introducing the Fun-Key Century 222 50 size helicopter kit. This model is highly detailed featuring the finest pre-painted fiberglass and pre-mounted aircraft grade wood parts. This unique model also features very high detail such as translucent plastic lights which can be fitted with actual LED type lights(not included), fuel tank, exhaust vents and mesh screens. The exhaust vents have even been airbrushed to simulate the exposion of exhaust from the vents! We are very proud to present this gorgeous body kit presented with the finest attention to detail for your 50 size R/C model!
[link=http://www.centuryheli.com/products/helikits/CN1081Bell222/index.html?currentid=315]http://www.centuryheli.com/images/more_info.gif[/link] [/font]


[size=2]CENTURY J Ranger .50 Size Helicopter Kit
[link=http://www.centuryheli.com/products/helikits/cn1082ajranger/index.htm?currentid=319]http://www.centuryheli.com/products/...ages/title.gif
http://www.centuryheli.com/products/...verall_350.jpg[/link]
SPECIFICATIONS:
Length: 50"
Height: 16"
Main Rotor Length: 600mm
Tail Rotor Length: 95mm
Engine: .50
Weight: 8-9 lbs
Color: blue/white

The new 50 size Century J Ranger is the newest of our 50 size R/C sacle helicopters. It is constructed of the highest quality fiberglass material. The mechanics inside are the famous Falcon 50 mechanics. Most of the mechanics are pre-build and just waiting for the motor and electronics. Adding the optional new carbon fiber struts and metal skids adds realism to this beautifully painted scale fuselage. There is easy access in removing the main mechanics by removing the front cabin cap. Optional lights are also available.

[link=http://www.centuryheli.com/products/helikits/cn1082ajranger/index.htm?currentid=319]http://www.centuryheli.com/images/more_info.gif[/link] [/font]



[size=2]Huges 500 .50 Size Fuselage Kit
[link=http://www.centuryheli.com/products/fuselages/funkey/Hughes500/index.htm?currentid=325]
http://www.centuryheli.com/products/...verall_350.jpg[/link]
The new 50 size Hughes 500D is the newest of our 50 size R/C scale fuselage. It is constructed of the highest quality fiberglass material.
[link=http://www.centuryheli.com/products/fuselages/funkey/Hughes500/index.htm?currentid=325]http://www.centuryheli.com/images/more_info.gif[/link] [/font]

RE: Century's New Scale Helicopter/Fuselage Kits
 

Century's paint jobs are gorgeous, but that Hughes 500 has to take the cake. It is absolutely beautiful!!
guess I need to start being a good boy since Xmas is right around the corner:D

RE: Century's New Scale Helicopter/Fuselage Kits
 

Hi Century,
I am deciding on a Jet ranger or a 222 ( I have til payday to decide) I just wanted to say thank you for the catalog I received in the mail a week or two ago. It was a nice suprise. a lot of people don't even have a printed catalog any more. If it makes any difference for marketing, as a consumer The printed catalog made me look closer into your products.
Regards,
Jay Rimel

RE: Century's New Scale Helicopter/Fuselage Kits
 

How well of a fit is the Long Ranger fuse with the Raptor 50?

RE: Century's New Scale Helicopter/Fuselage Kits
 

Hi Green river,
Here is a link to the matching chart. It says your .50 will fit. http://www.centuryheli.com/products/.../fuselcrt.html
Hope this helps.
Jay

RE: Century's New Scale Helicopter/Fuselage Kits
 

I love the new Bell 47G. Also the R-22 is Cool.
It would be neat to see the Rotoway Exec. No One is doing it.

RE: Century's New Scale Helicopter/Fuselage Kits
 

Pretty good fit. :D

With Nitro power:
http://fritzthecat.250free.com/image...ngranger-a.jpg

With E-Power:
http://fritzthecat.250free.com/image...newingrass.jpg

Details at:
http://fritzthecat.250free.com/bell206l.html

Fritz

RE: Century's New Scale Helicopter/Fuselage Kits
 

Fritz, someone put the tail rotor on the wrong side of your chopper dude! :D

Seriously that thing is sweet.

RE: Century's New Scale Helicopter/Fuselage Kits
 

I Just got the Hughes 500D to fit the JR Voyager 50. So far not a problem.

Hey DrDoom ! Len Mount does a Rotorway Exec 162F , just as a matter of interrest.

RE: Century's New Scale Helicopter/Fuselage Kits
 

Fritz,
How did you make the decals? They look very good!

Great looking bird! The hand on the thigh is a nice touch. Every helicopter should be flown by 2 "barbie-like" women.

RE: Century's New Scale Helicopter/Fuselage Kits
 

The N4CQ was done by first painting silver then using stick on letters while the purple was shot. Letters where then peeled off.
The WTMJ etc is stick on letters
The rest was painted using spraycans and about 5000 yards of fineline masking tape.

No airbrush was used in painting - all Pactra Racing Color Laquer paint in cans. Clear coat was done by a Auto Body Shop (U$125).

http://fritzthecat.250free.com/bell206l.html


Fritz

RE: Century's New Scale Helicopter/Fuselage Kits
 

Fritz,

That's great! I am an autobody shop owner(technician of many years, as well) and I know exactly how much time it takes to do something like that. I am very impressed at the level of detail.

I just ordered my 206L4 kit from them, and that's how I found your heli pictures. I am doing the same thing to mine, except I am doing the local "Chopper 11" WPXI-Pittsburgh helicopter. I think Helicopters Inc. owns it. I am having a hard time finding good pictures of it, as it isn't as popular as it used to be. They used to have a whole page on their website, about "Chopper 11." Did you find that helicopter on helispot.com?

One final question... Is the "pilot" looking at porn?

RE: Century's New Scale Helicopter/Fuselage Kits
 

I have a Voyager 50 also. Did you run into any problems?? How's the fit??

RE: Century's New Scale Helicopter/Fuselage Kits
 

Thank you, I appreciate the comments. The '4' was a lot of work. Luckily I had a good side picture of it.

I found the pictures on the Chopper4 page at the TV station. Seems they took that page down. Ask your TV station if you can do a walkaround. Maybe they'll even feature you on the News.

Nyet. Here are the pics on the displays. For the instruments I downloaded pics from manufacturer websites and sized them in my paintprogram. Print out and glue.
The chicks are from my desktop wall papers.

Backwall with Allison Hannigan (top) and Jeri Ryan (bottom), motivational poster, AR-15 cutaway, P-3C Orion bombbay door switch wiring diagram and wiring diagram of my F150 truck stereo.
http://fritzthecat.250free.com/image.../scaleback.jpg

Reporter Displays Rosanne Cash top left, Linda Hamilton top right and Jeri Ryan bottom
http://fritzthecat.250free.com/image...playssmall.jpg

Fritz

RE: Century's New Scale Helicopter/Fuselage Kits
 

Fritz,

THAT is sick!!!!1!!11!!one!!one1!!

Are those custom built skids? If not where did you find them? They look great.


I am going to order that fuse for my rappy 50 V2. I'll post some pics when I get it done. Hopefully I wont embarass myself! It's a lot of work to do something as scale as you did. I have helicopter envy.

John

RE: Century's New Scale Helicopter/Fuselage Kits
 

Skds are easy, make them out of brake tubing.

RE: Century's New Scale Helicopter/Fuselage Kits
 

Fritz, whats with the P-3 background? You in the Navy or something? P-3B FCO and P-3CUIII Flight Tech here.

RE: Century's New Scale Helicopter/Fuselage Kits
 

Hughes 500D with Voyager 50 mechanics.

I haven't had any mayor issues fitting the voyager 50 into this fuse. Mine is almost complete and looking good so far. It just takes a bit of time getting the tail perfect. the most mayor mod I had to do was enlargening the the cut-out for the main shaft and rotors on top of the fuse and also slotting the tailboom at the end for the tailrotor pushrod to exit. then the only other mod was to cut the hole longer on the wood mounting deck for the mechanincs inside the fuse to accomodate the rear facing engine of the voyager. You had to extend the existing rectangular cut-out by about 1 inch.

You can use some of the stock rear 3mm mounting holes in this deck with you just needing to drill 2 new ones for the front. Fortunately the fuse comes with a wide selection of screws and fixing brackets that you can mix and match to get the mechs mounted neatly.

RE: Century's New Scale Helicopter/Fuselage Kits
 

I recently got the unpainted 50 size 222. I am really happy with the quality of the fuse and the stock detail. I have already had it in the air with just primer on it. I am using 30 size shuttle mechanics with a GPH boom and belt to make the tail longer for the 50 size fuse. This combo of mechanics and fuse is great, it leaves tons of room up from for a full cockpit and isnt going to be to bad to get the CG right either....heres some pics...

http://img235.imageshack.us/img235/6374/dscn03704jo.jpg
http://img74.imageshack.us/img74/2368/dscn07405dt.jpg

here is a pic of the mod i did to the tail. The full size 222 has the t/r on the left side, but the century fuse has it on the right. So i cut off about 3 inches of the tail, flipped it, glassed it back on, and bondoed all the seams, you cant even tell i did this and now the t/r is on the scale side...

http://img220.imageshack.us/img220/9725/dscn07398bw.jpg
http://img135.imageshack.us/img135/7929/19sn2.jpg

and heres the scheme ill be doing...

http://img209.imageshack.us/img209/2489/22247hf.jpg

RE: Century's New Scale Helicopter/Fuselage Kits
 

Where can I find a Fuse for my Raptor 60 Like a Bell 222 or similar

RE: Century's New Scale Helicopter/Fuselage Kits
 

I'm looking at getting a century bell jet ranger for my t-rex 600 but I really want scale looking skids. I don't have the skills to build one. Is there somewhere where i can buy one or get one made?

RE: Century's New Scale Helicopter/Fuselage Kits
 

Nice job on the tail mod. You are right you can't even tell. I do have a question regarding flipping the tail mechanics. On a raptor 50 can you just simply flip the boom over? I can't think of a reason why you couldn't.

Did you use the Century retracts and scale muffler?

RE: Century's New Scale Helicopter/Fuselage Kits
 

ANYBODY COULD BUILD ME A SCALE LANDING SKID FOR A LONG RANGER? CALL ME (786)316-8747 JOSE THANKS!!!

RE: Century's New Scale Helicopter/Fuselage Kits
 

Pretty good fit


[link=http://www.rcroll.com]all kinds of rc helicopter[/link]

[link=http://www.flashlightcool.com]flashlight[/link]

[link=http://www.game4box.com]Cheap Video Games[/link]