E-Start Issues
07-29-2009, 08:11 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: , CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
E-Start Issues
Ok so i got a problem w/ my e-start on my menace 21.
When i put the drill and try cranking the engine nothing happens. The engine doesn't turn over, but the e-start just spins. I pulled out the whole assembly and can't for the life of me figure out why it isn't working. I read some posts saying that it needs to be clean and dry, so i cleaned the whole assembly and put it back together and still nothing. If anyone knows anything on how to fix this problem that would be awesome.
When i put the drill and try cranking the engine nothing happens. The engine doesn't turn over, but the e-start just spins. I pulled out the whole assembly and can't for the life of me figure out why it isn't working. I read some posts saying that it needs to be clean and dry, so i cleaned the whole assembly and put it back together and still nothing. If anyone knows anything on how to fix this problem that would be awesome.
07-31-2009, 07:29 PM
#3
Junior Member
Thread Starter
Join Date: Jul 2009
Location: , CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: E-Start Issues
Thats exactly it. I called schumacher and talked to one of their techs. The one way clutch has a tiny crack in it which causes it to be too lose so it wont turn the engine. Luckily its only a 20$ part. Unfortunately my no hobby shops in San Diego carry the part 
so i have order it from their site.
so i have order it from their site.
