RC Modeler Magazines/Articles are available to you!
#26
Member
Join Date: Oct 2011
Location: Dallas,
TX
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
PM me if interested.
MK
#29
Great effort, thanks very much for what you are offering! As I am looking at doing a model of the "Der Jager" home built biplane I recall a build article for a model in RCM around the '70s; could you have a look and post if you have it? Thanks a lot
#30
Senior Member
Thread Starter
Hi Franc,
Here is the article that you requested. Enjoy!
Happy flying and soft landings!
[ATTACH]1974918[/IMG]
Here is the article that you requested. Enjoy!
Happy flying and soft landings!
[ATTACH]1974918[/IMG]
Last edited by ser00; 03-25-2014 at 06:33 AM.
#35
My Feedback: (2)
Hello all,
I finally completed a labor of love that took three years in the making. When I first got started in RC modeling, I would pick up Radio Control Modeler Magazine and read the articles in it from cover to cover and repeat. Well, this was during my college days and I needed to make a decision between finishing school or building more airplanes. After completing my degree, I got back into building and flying RC planes. I ordered a set of plans from RCMplans.com (when they were still faithful in getting their plans out to customers) and I was looking for a build article for the F-117 (February 1997 issue) and I asked if anybody could send me a scanned copy of the article. Well, all I got was that I could pay for the article or buy the magazine from individuals. I thought that this was not very helpful so I decided to look on EBAY and I found and obtained the magazine. I read the magazine from cover to cover and I remember how much I enjoyed the magazine. I decided to see if I could order more RC Modeler Magazines to read. After acquiring a fair number of magazines, I decided that I would scan the magazines and convert them into PDFs for easy storage and retrieval. Long story short, I have acquired, scanned and converted them all into PDFs. All the issues from October 1963 to June 2005. Along the way, I have also collected Model Aviation, Model Airplane News and Flying Model magazines, all of which have been scanned to PDF. So, if you are looking for an article, a review, a build article or whatever, please let me know and I will upload the article so that you and anybody else can enjoy it.
Happy flying and soft landings!
I finally completed a labor of love that took three years in the making. When I first got started in RC modeling, I would pick up Radio Control Modeler Magazine and read the articles in it from cover to cover and repeat. Well, this was during my college days and I needed to make a decision between finishing school or building more airplanes. After completing my degree, I got back into building and flying RC planes. I ordered a set of plans from RCMplans.com (when they were still faithful in getting their plans out to customers) and I was looking for a build article for the F-117 (February 1997 issue) and I asked if anybody could send me a scanned copy of the article. Well, all I got was that I could pay for the article or buy the magazine from individuals. I thought that this was not very helpful so I decided to look on EBAY and I found and obtained the magazine. I read the magazine from cover to cover and I remember how much I enjoyed the magazine. I decided to see if I could order more RC Modeler Magazines to read. After acquiring a fair number of magazines, I decided that I would scan the magazines and convert them into PDFs for easy storage and retrieval. Long story short, I have acquired, scanned and converted them all into PDFs. All the issues from October 1963 to June 2005. Along the way, I have also collected Model Aviation, Model Airplane News and Flying Model magazines, all of which have been scanned to PDF. So, if you are looking for an article, a review, a build article or whatever, please let me know and I will upload the article so that you and anybody else can enjoy it.
Happy flying and soft landings!
ser00,
I am so pleased find your post. I was involved in the design of the RCM Classic radio and have intended to try to find my copies of the RCM construction articles and scan them myself. I don't remember if the articles started in 1968 or 1969. I would like to get PDF on all the construction articles if possible.
#36
Senior Member
Thread Starter
Here you go Chipmaker. I had to optimized the PDF alittle to get it under 5mb. Enjoy!
Happy flying and soft landings!
[ATTACH]1976297[/IMG]
Happy flying and soft landings!
[ATTACH]1976297[/IMG]
Last edited by ser00; 03-25-2014 at 06:33 AM.
#38
Senior Member
Thread Starter
Here you go Sidgates. Enjoy!!
Happy flying and soft landings!
[ATTACH]1976312[/IMG]
[ATTACH]1976320[/IMG]
[ATTACH]1976319[/IMG]
[ATTACH]1976318[/IMG]
[ATTACH]1976317[/IMG]
[ATTACH]1976316[/IMG]
[ATTACH]1976315[/IMG]
[ATTACH]1976314[/IMG]
[ATTACH]1976313[/IMG]
[ATTACH]1976321[/IMG]
Happy flying and soft landings!
[ATTACH]1976312[/IMG]
[ATTACH]1976320[/IMG]
[ATTACH]1976319[/IMG]
[ATTACH]1976318[/IMG]
[ATTACH]1976317[/IMG]
[ATTACH]1976316[/IMG]
[ATTACH]1976315[/IMG]
[ATTACH]1976314[/IMG]
[ATTACH]1976313[/IMG]
[ATTACH]1976321[/IMG]
#39
My Feedback: (2)
Here you go Sidgates. Enjoy!!
Happy flying and soft landings!
[ATTACH]1976312[/IMG]
[ATTACH]1976320[/IMG]
[ATTACH]1976319[/IMG]
[ATTACH]1976318[/IMG]
[ATTACH]1976317[/IMG]
[ATTACH]1976316[/IMG]
[ATTACH]1976315[/IMG]
[ATTACH]1976314[/IMG]
[ATTACH]1976313[/IMG]
[ATTACH]1976321[/IMG]
Happy flying and soft landings!
[ATTACH]1976312[/IMG]
[ATTACH]1976320[/IMG]
[ATTACH]1976319[/IMG]
[ATTACH]1976318[/IMG]
[ATTACH]1976317[/IMG]
[ATTACH]1976316[/IMG]
[ATTACH]1976315[/IMG]
[ATTACH]1976314[/IMG]
[ATTACH]1976313[/IMG]
[ATTACH]1976321[/IMG]
ser00,
Thanks you so much, I hope I can return the favor some time.
Sid Gates
#45
When you can, could I please get the construction article for the RCM 1/2 A Basic Trainer from December 1978. thanks and really appreciate all the hard work in putting these together.
#47
Join Date: Feb 2006
Location: Boyertown,
PA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Bat - I wrote the article for the 46" Storch in what I think was the last issue of RCM in 2005. I have a copy of the orig article and the master for the plans. I have also since redesigned the model for elec. It's a tough little model to fly however.
Rob
Rob
#48
Member
Join Date: Sep 2013
Location: Oklahoma City
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Steve.
#49
My Feedback: (2)
Hi ser00, I commend you for this hugh effortand appreciate all the work that had gone into this effort which now may resurect a longtime in the waiting project I have had on the shelf.
If possible and at your convenience, can you help with the AQUABIRD / RCM 9/92.I have the plans but never had the build article.
Thank you
Kerry S.
If possible and at your convenience, can you help with the AQUABIRD / RCM 9/92.I have the plans but never had the build article.
Thank you
Kerry S.
Last edited by Vampire; 04-25-2014 at 04:21 AM.
#50
Senior Member
My Feedback: (1)
Join Date: Nov 2002
Location: Roanoke, VA
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
plans flying models
hi ser00
manly, many years ago flying models published plans and building article for a 45 to 60 size
pt 19. do you have any info on this? if so would greatly appreciate what you have.
thanks and happy flying
pt19 flyer <[email protected]>
manly, many years ago flying models published plans and building article for a 45 to 60 size
pt 19. do you have any info on this? if so would greatly appreciate what you have.
thanks and happy flying
pt19 flyer <[email protected]>
Hello all,
I finally completed a labor of love that took three years in the making. When I first got started in RC modeling, I would pick up Radio Control Modeler Magazine and read the articles in it from cover to cover and repeat. Well, this was during my college days and I needed to make a decision between finishing school or building more airplanes. After completing my degree, I got back into building and flying RC planes. I ordered a set of plans from RCMplans.com (when they were still faithful in getting their plans out to customers) and I was looking for a build article for the F-117 (February 1997 issue) and I asked if anybody could send me a scanned copy of the article. Well, all I got was that I could pay for the article or buy the magazine from individuals. I thought that this was not very helpful so I decided to look on EBAY and I found and obtained the magazine. I read the magazine from cover to cover and I remember how much I enjoyed the magazine. I decided to see if I could order more RC Modeler Magazines to read. After acquiring a fair number of magazines, I decided that I would scan the magazines and convert them into PDFs for easy storage and retrieval. Long story short, I have acquired, scanned and converted them all into PDFs. All the issues from October 1963 to June 2005. Along the way, I have also collected Model Aviation, Model Airplane News and Flying Model magazines, all of which have been scanned to PDF. So, if you are looking for an article, a review, a build article or whatever, please let me know and I will upload the article so that you and anybody else can enjoy it.
Happy flying and soft landings!
I finally completed a labor of love that took three years in the making. When I first got started in RC modeling, I would pick up Radio Control Modeler Magazine and read the articles in it from cover to cover and repeat. Well, this was during my college days and I needed to make a decision between finishing school or building more airplanes. After completing my degree, I got back into building and flying RC planes. I ordered a set of plans from RCMplans.com (when they were still faithful in getting their plans out to customers) and I was looking for a build article for the F-117 (February 1997 issue) and I asked if anybody could send me a scanned copy of the article. Well, all I got was that I could pay for the article or buy the magazine from individuals. I thought that this was not very helpful so I decided to look on EBAY and I found and obtained the magazine. I read the magazine from cover to cover and I remember how much I enjoyed the magazine. I decided to see if I could order more RC Modeler Magazines to read. After acquiring a fair number of magazines, I decided that I would scan the magazines and convert them into PDFs for easy storage and retrieval. Long story short, I have acquired, scanned and converted them all into PDFs. All the issues from October 1963 to June 2005. Along the way, I have also collected Model Aviation, Model Airplane News and Flying Model magazines, all of which have been scanned to PDF. So, if you are looking for an article, a review, a build article or whatever, please let me know and I will upload the article so that you and anybody else can enjoy it.
Happy flying and soft landings!