Scratch Building a H9 UltraStick .40
#1

Thread Starter
My Feedback: (182)
Join Date: Dec 2001
Location: Sinton, TX
Posts: 521

I want to get specifics on this plane...wingspan, length, side view, top view, possibly even get a set of plans.
...a little help if you got it would be REALLY appreciated. ...well?
...or possibly I should just start from 'ground zero' and design my own.
...a little help if you got it would be REALLY appreciated. ...well?
...or possibly I should just start from 'ground zero' and design my own.
#2

My Feedback: (123)
Join Date: Jan 2002
Location: Marysville,
WA
Posts: 408
#3
Member
Join Date: Oct 2011
Location: Dallas,
TX
Posts: 71

Here is the Ultra 60 I started to draw up, It is almost complete. I'm sure there are a few changes that could be made. The pdf is in vector format so It can be scaled to any size.
Hope this helps.
MK
[ATTACH]2120523[/IMG]
Hope this helps.
MK
[ATTACH]2120523[/IMG]
#4

Thread Starter
My Feedback: (182)
Join Date: Dec 2001
Location: Sinton, TX
Posts: 521

mkoe, thanks! That's what I am after...the only thing missing is flap/aileron construction, but I'd bet it is similar to the elevator.
I plan on building a similar 40'ish sized plane to this but making everything symmetric/centered about the thrust line.
I plan on building a similar 40'ish sized plane to this but making everything symmetric/centered about the thrust line.
«
Previous Thread
|
Next Thread
»