.46 3d plane in the works
#1
Member
Thread Starter
My Feedback: (4)
Join Date: Jan 2004
Location: Flagstaff,
AZ
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
.46 3d plane in the works
Hey,
Well i have been designing balsa electric planes for a wile now and i would like to try my hand at a larger plane. I dont plan on making this plane for anyone besides me so i wanna keep it simple, light weight, and fly good. Im not to conserend with stregth since i dont plan on crashing or flying full bore. I just want a 3d plane that can float and do 3d manuveres.
This is what i have so far. I wanna make the wing out of foam, put a large CF tube in it, and sheet it with balsa. no cowel btw. I dont need help building or designing the insides, im just curious what you think about the surfaces and layout.
Thanks for your help
Alex
Well i have been designing balsa electric planes for a wile now and i would like to try my hand at a larger plane. I dont plan on making this plane for anyone besides me so i wanna keep it simple, light weight, and fly good. Im not to conserend with stregth since i dont plan on crashing or flying full bore. I just want a 3d plane that can float and do 3d manuveres.
This is what i have so far. I wanna make the wing out of foam, put a large CF tube in it, and sheet it with balsa. no cowel btw. I dont need help building or designing the insides, im just curious what you think about the surfaces and layout.
Thanks for your help
Alex