Pylon Racers Plan
#26
Junior Member
Join Date: Dec 2005
Location: nazareth,
PA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
#27
Junior Member
Join Date: May 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pylon Racers Plan
#29
My Feedback: (1)
Join Date: Dec 2001
Location: Waseca,
MN
Posts: 8,456
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pylon Racers Plan
Yes, two 1/4 -20 counter sunk bolts in the front, and two 10/24 bolts in the back.
Plans available for free download at www.supertrc.com Laser Cut kits are also available at the same site.
Plans available for free download at www.supertrc.com Laser Cut kits are also available at the same site.
#31
Senior Member
Join Date: Jul 2002
Location: West Palm Beach,
FL
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
#33
My Feedback: (1)
Join Date: Dec 2001
Location: Waseca,
MN
Posts: 8,456
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pylon Racers Plan
Appreciate it, I spent a lot of time designing it, drawing the plans, and making changes till I was happy with the flying characteristics.
I'm working on a new one now, trying to design the EASIST to assemble Quickie kit on the market, so it will have a standard tail, and be geared towards the 424 class.
I'm working on a new one now, trying to design the EASIST to assemble Quickie kit on the market, so it will have a standard tail, and be geared towards the 424 class.
#34
Junior Member
Join Date: Jul 2005
Location: Wabash,
IN
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pylon Racers Plan
#37
My Feedback: (1)
Join Date: Dec 2001
Location: Waseca,
MN
Posts: 8,456
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pylon Racers Plan
They are glass/balsa/glass sandwiched parts bagged in a mold, then joined.
Search "Seeker wing Mold" and you'll find about 10 pages of my trials and tribulations of building wings. The wing in the picture was made in Australia by www.bigbruceracing.com using a similar mold (although his are two piece).
I have had much better success molding composite tails, there is also a thread on that somewhere in the Composites forums.
Search "Seeker wing Mold" and you'll find about 10 pages of my trials and tribulations of building wings. The wing in the picture was made in Australia by www.bigbruceracing.com using a similar mold (although his are two piece).
I have had much better success molding composite tails, there is also a thread on that somewhere in the Composites forums.
#40
Senior Member
Join Date: Jul 2007
Location: Las Cruces,
NM
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pylon Racers Plan
Hey I stumbled over this and am very interested. I noticed that there hasen't been a post for a while but if it would bee OK could you send me your plans Ed? Thanks
#42
Member
Join Date: May 2010
Location: salta, ARGENTINA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pylon Racers Plan
Please can you email me the plans?, i really want to build one of this amazing planes, i loved the q40 and i cant get one, where i lived nobody sells it
ORIGINAL: Ed Smith
Take your pick. They are plans that I drew for my own use. The airplanes have glass fuselages and foam core wings. So some of the finer detai is not included. You will have to make some building decisions. The outline is correct. They are saved in Autocad 2000. I am not in the model airplane business so do not make parts for people.
I can email these to you if you wish.
Ed S
Take your pick. They are plans that I drew for my own use. The airplanes have glass fuselages and foam core wings. So some of the finer detai is not included. You will have to make some building decisions. The outline is correct. They are saved in Autocad 2000. I am not in the model airplane business so do not make parts for people.
I can email these to you if you wish.
Ed S
#45
Junior Member
Join Date: Oct 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Hello, Im form Argentina, I was looking for the seeker plan, please could you send it to me?
[email protected]
Thank you
[email protected]
Thank you
#48
Italian guys here seem to have information about Viper.
http://www.baronerosso.it/forum/aero...r-disegno.html
I did not read it all. At least there is sketches with dimensions and airfoil. Maybe enough to draw a plan.
http://www.baronerosso.it/forum/aero...r-disegno.html
I did not read it all. At least there is sketches with dimensions and airfoil. Maybe enough to draw a plan.