1/8 scale brumby
#1
Member
Thread Starter
Join Date: Oct 2008
Location: GrenfellNSW, AUSTRALIA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
1/8 scale brumby
Hi Guys
I plan on building a 1/8 scale brumby.
This is my first scratch build I don't know much about building models so could you answer me some questions?
Is 1/16 balsa really flexable for covering the front and back of the wings?
Any Ideas on how I would do the canopy?
Any Guidance or Ideas at all?
http://www.brumbyaircraft.com.au/Production.htm
Thanks
Peter Cochrane
Australia
I plan on building a 1/8 scale brumby.
This is my first scratch build I don't know much about building models so could you answer me some questions?
Is 1/16 balsa really flexable for covering the front and back of the wings?
Any Ideas on how I would do the canopy?
Any Guidance or Ideas at all?
http://www.brumbyaircraft.com.au/Production.htm
Thanks
Peter Cochrane
Australia
#2
Member
Thread Starter
Join Date: Oct 2008
Location: GrenfellNSW, AUSTRALIA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/8 scale brumby
I've done some planning on paper and it ends up with about 41.8 inch wing span but i wonder if this is too small for an all balsa plane?