Convert DXF to IGES.files
#1
Member
Thread Starter
Join Date: May 2004
Location: Kungsbacka, SWEDEN
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Convert DXF to IGES.files
Hi
Iamlookingfor help to convertmy DXF files to IGES.
Have drawings on Swedish SaabJAS39 Gripen and JA37 Viggen in DXF files.
Need it to milling molds.
Jonas
Iamlookingfor help to convertmy DXF files to IGES.
Have drawings on Swedish SaabJAS39 Gripen and JA37 Viggen in DXF files.
Need it to milling molds.
Jonas
#2
My Feedback: (125)
RE: Convert DXF to IGES.files
Most CAD programs have the ability to export in various file formats including IGES. Even the ancient version of CadKey I use has an IGES converter module. If yours doesn't, here's a downloadable program that will do the DWG/DXF to IGES conversion...
http://www.datakit.com/cad-convertor...d-to-iges.html
http://www.datakit.com/cad-convertor...d-to-iges.html
#3
Member
Join Date: Jun 2004
Location: KC, MO,
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
RE: Convert DXF to IGES.files
Email the files to me and I will try to covert them for you.
ORIGINAL: Jonas Bergstr�m
Hi
Iamlookingfor help to convertmy DXF files to IGES.
Have drawings on Swedish SaabJAS39 Gripen and JA37 Viggen in DXF files.
Need it to milling molds.
Jonas
Hi
Iamlookingfor help to convertmy DXF files to IGES.
Have drawings on Swedish SaabJAS39 Gripen and JA37 Viggen in DXF files.
Need it to milling molds.
Jonas
#4
Senior Member
My Feedback: (1)
RE: Convert DXF to IGES.files
I am not a fan of the IGES situation. I used to receive one plan each third week which was for coversion over to an Autocad drawing. They were shipped originally in an IGES format, and quite often the lines making up teh figures do not align with one another. May have been close enough for an overlap on the plotter, but that was not good enough for Acad.
I think we wound up pulling all the way in to Acad, then exported a fixed drawing via DXF or DWG. Maybe they fixed that by now.
Wm.
I think we wound up pulling all the way in to Acad, then exported a fixed drawing via DXF or DWG. Maybe they fixed that by now.
Wm.