frankolin42

My Feedback: (2)

Ladies and Gentleman, I open this new post to see what everyone is planning to scratch or kit build....NO ARF or ATF lazies need apply to this post. Just the plan, drafter, or kit builder, Let us know what your gonna build. I myself is debating over a Junkers JU-87 V1 or the Dave Platt Spitfire. maybe even a Uncle Willies Grumman Goose....cheers

AH1G

Man, that's an easy one.
Currently,on the boards:
Finish a Bud Nosen J3 converion to Super Cub.
A cowl for mold and parts for a 120" Gloster Gladiator.
A cowl and canopy molds and parts for a 145" B25.
A Cowl and fuelage molds for a 120" H1 racer.
A cowl and wheel pants molds for a 120" P26 Peashooter.
A fuselage and cowl molds and parts for a 120" H1 racer.
A fuselage, cowl, wing tips and lower ventral fin mold for a C206.
Build a full scale C206 on Wipline 3450 amphibs.

There are more items including a cowl and maybe fuselage for a 1/3 scale (148") P51.
Nope, I'm not busy...

ARUP

1/4 RRG Prufling, 1/4 Nemeth Umbrellaplane and either a 1/4 Brandenburg 'Starstrutter', Lloyd 40.15 or Roland DVI. I have drawn the plans for all except the Roland which is an enlargement of the J.Kiger 1/5 set of drawings.

davidgeorge212

Theres no such thing as a winter project in my garage, I build year round. But if everything goes according to plan, I hope to finish up quite a few plane builds, projects, and rebuilds that I have been working on for quite a while. I want to finish up my Monocoupe 90-a built from plans, finish up a pitts s2s I started framing up a year ago, and also work some more on my 1/2 scale stits sky baby that I have neglected due to lack of time and to much school work.

David

sergio luiz

Man,
I am finishing the project of a SAAB 90 SACANDIA with 110" inches, and finishing the construction of CONVAIR 440
METROPOLITAN with 82 " inches, and drawing a FAIRCHILD C-119 with 100" inches of wing.

Sergio Luiz.

JKEpps

My Feedback: (1)

Wow AH1G! You're a modeled after my own heart! Do you have anything under 100"? LOL!

Well here's my meager list:

Finish my Balsa USA 1/3 scale Ercoupe.
Finish my Hostetler 1/4 scale Cessna Skymaster
If I get bored, build my Bud Nosen 100+ inch P-51

AH1G

No current projects...

CoosBayLumber

My Feedback: (1)

The wing was once done via Bob Holman a few years ago for this. The fuselage (in fiberglass) is available via Doss Steed.

Wm.

AH1G

Do you have his contact info? I would save me a lot of time and effort if one is available.
Brian

I-fly-any-and-all

My Feedback: (1)

How about a .60 size corsair by royal, it is true to scale in terms of size, meaning if scaled up it is an exact match to the outline of the full size corsair!
I've got the templates all drawn in cad which were done by my friend Kelsey_B
If you want them email me.
[email protected]
heres a link to my build: http://www.rcuniverse.com/forum/fb.asp?m=9679319

Dionysus build: http://www.rcuniverse.com/forum/m_62..._1/key_/tm.htm

Kelsey_B build: http://www.rcuniverse.com/forum/m_39..._1/key_/tm.htm

CoosBayLumber

My Feedback: (1)

You may need to go to BHPLANS.com for that Info.

Was told that Steed died, and someone new took over everything, including the retracts.


Wm.

CoosBayLumber

My Feedback: (1)

You may want to hold off a day or two on the Spitfire, for am finding the Trojan plans not too accurate.


Wm.

frankolin42

My Feedback: (2)

Wouldn't this look cool on the flying field? How often among the Cubs, Mustangs, Zeros, and the myriad of modern jets, do you see one of these?[&:][&:]

b206

My Feedback: (1)

Starting my build of a Hatz biplane. Using AMA plans but changing the fuselage to be built more like the Smith Miniplane fuse.
Has anyone ever built this plane?

TripleDeucer

My Feedback: (129)

I too build all year long, but I especialy like the winter because those evenings are so long and I get allot done. Plus, no yard work to worry about.
So, I'll be starting my 1/3 BUSA Super Cub soon. I should be painting and finishing by early spring.

F4u5

My Feedback: (81)

124 inch enlarged Brian Taylor Mosquito with Unitracts retracts and twin G-45's with 20x10 mezjlik props, is up this winter for me.

JEff

dreadnaut

My Feedback: (5)

I started on this plug for a 42" Yak a couple of years ago, then put it up. It is now time to dust it off and put it back on the front burner.

limeybob

My Feedback: (6)

TSR-2 for a turbine.

Here's the detachable nose section.


Getting the rest of the fuselage parts ready for laser cutting.

Bob

bps

My Feedback: (3)

Well lets see.
Hostetler 29% Gee Bee Z
Top Flight Giant Scale P-47
BUSA Nieuport 17 1/4 Scale
Sig 1/4 Scale Clip Wing Cub to paint
Nieuport 11 30% From a friends hand drawn plans.
Other than that take most of the winter off!

AA5BY

My hope is to finally get a Travel Air 6000 on the boards for a 98" build. I've the plan, wood, wheels, and dummy radial in the closet ready to go and have finished other repair projects. The project has been a desire for a year now.

redbiscuits

My Feedback: (6)

1/5 scale Pica Waco going on the table after I finish my Rebel and TF P-47 60 size. Should happen sometime in December, just in time for Santa to bring me a DLE 20 for the power.
Red.

Thunderbolt47

My Feedback: (8)

I just got started on a 162" Art Scholl, Super Chipmunk. Couldn't wait for winter.
Kelly

F4u5

My Feedback: (81)

That Chipmunk will be a nice project, and nice size. What engine you have lined up for it?

Jeff

Thunderbolt47

My Feedback: (8)

Hey Jeff, I'm going with a DA-150. Although I'm building N13Y it will not have retracts. (Not yet anyhow)
Also the single place means a smaller canopy to pull.
Wing will be in 3 pieces. center 60" and the two outers 51".
Also the tail will be removeable. To fit my trailer.[8D]

Later,
Kelly


The man himself!!
http://www.youtube.com/watch?v=A-kHTmYjBQk

yellerchamp

My Feedback: (42)

yes the man, art was the best and a nice man to meet and talk to.....