RCU Forums - Scratch Building a H9 UltraStick .40

RCU Forums (https://www.rcuniverse.com/forum/)

- Scratch Building, Aircraft Design, 3D/CAD (https://www.rcuniverse.com/forum/scratch-building-aircraft-design-3d-cad-174/)

- - Scratch Building a H9 UltraStick .40 (https://www.rcuniverse.com/forum/scratch-building-aircraft-design-3d-cad-174/11621566-scratch-building-h9-ultrastick-40-a.html)

Gene Chernosky

09-09-2015 07:01 PM

Scratch Building a H9 UltraStick .40

I want to get specifics on this plane...wingspan, length, side view, top view, possibly even get a set of plans.

...a little help if you got it would be REALLY appreciated. ...well?

...or possibly I should just start from 'ground zero' and design my own.

b.bixel

09-12-2015 07:28 AM

For 40 sized specs go here

For 120 sized plans/cad data for which the seller may reduce for you go here

mkoe	09-18-2015 07:42 AM

1 Attachment(s)

Here is the Ultra 60 I started to draw up, It is almost complete. I'm sure there are a few changes that could be made. The pdf is in vector format so It can be scaled to any size.
Hope this helps.
MK

[ATTACH]2120523[/IMG]

Gene Chernosky

09-19-2015 07:44 AM

mkoe, thanks! That's what I am after...the only thing missing is flap/aileron construction, but I'd bet it is similar to the elevator.

I plan on building a similar 40'ish sized plane to this but making everything symmetric/centered about the thrust line.

All times are GMT -8. The time now is 12:13 AM.