RE: Pitts M12 26% plans available soon
1 Attachment(s)
Elias,
Thanks for the Cad files, I'm still in need of the Laser Parts sheet, If anyone can! Please send me a PM. Thanks, Mike Hi, I Meant to ask, Does anyone have the Laser Sheet for the "Bernard Burton Spirit Of Pitts M12" in .pdf or .dxf format, I know at one time there was one available, If there is, Could I please get a copy? It would make my scratch build a lot easier! "Regards, Mike PS: This is what I'm looking for! Full size parts laser sheet. |
RE: Pitts M12 26% plans available soon
|
RE: Pitts M12 26% plans available soon
Are the CAD files and lasercuts still available...would love to build this. I would be very thankful.
[email protected] thank you |
RE: Pitts M12 26% plans available soon
Well back again searching for Pitts M12 parts! First off let me say Hello and thanks to all of you that replied to my original Post for Bernard Burton 26% Spirit Of Pitts M12 Plans and parts, Now I have the plans and some of the parts, I have purchased the Cowl, Canopy, and Landing Gear The parts I need now are the Wing Tubes and Cabanes, If anyone has these parts available for sale PLEASE let me know
|
I want to build this beauty , kindly send the plan at [email protected], if still available.
Thanks. |
I would love to add this build to my collection. I now have a 33% Monocoupe on the table. Please send me the plans if they are available still. Thanks so much. [email protected]
|
Hi, I am Martin from Slovakia. I would like to build this plane. I found plans on - http://www.rcuniverse.com/forum/scra...l#post10811034 but there is no Laser Cuts Sheet. It's possible to send it to my email [email protected] or in PM?
Thank's you and have a nice day. Martin |
Hi, i want to build this model, can you send me the plans in dxf or dwg format? [email protected] thanks
|
|
I want to build this beauty , kindly send the plan at [email protected]. if still available.
Thanks. |
hello would like to build this plane would kindly please spend this plane thanks and see you soon
|
my email is [email protected]
|
Originally Posted by Hemikiller
(Post 11738263)
|
Originally Posted by BMatthews
(Post 11784647)
Guys, take a moment to read the thread. You can download the plans yourself from this link.
|
Anyone interested in the build thread of this? I just started a build thread using these plans. Got the fuse about 2/3 done.
|
2 Attachment(s)
A couple pics of the progress. I got a lot more on the new thread just started if anyone is interested.
|
Originally Posted by Brian Roth
(Post 11825425)
A couple pics of the progress. I got a lot more on the new thread just started if anyone is interested.
|
Always interested in pitts builds
|
|
Thank you Sir. Now I just need to finish the current one.
|
Spirit of Pitts plans files
5 Attachment(s)
Originally Posted by do335a
(Post 11418039)
All you guys looking for plans files, you should know that a while back there were plans and short kits offered.
About late last summer or fall as I recall -last year in any case, the plans owner/short kit builder sent an email to all of us on his email list saying sayonara - no more Pitts. End of the trail. No more anything. Prior to that, plans were readily and freely available from him. So those who's got, got and those who don't, don't. I had the plans until a computer wipe out fixed that problem. So now I'm in the same boat as the rest of you. As I recall, there are also a couple of videos on You Tube of a chap flying his copy of the plane with a 50cc engine. [ATTACH]2188115[/IMG][ATTACH]2188116[/IMG][ATTACH]2188117[/IMG][ATTACH]2188118[/IMG] http://www.rcuniverse.com/forum/atta...mentid=2188119 |
Hi , sorry for hooking too late, I am starting to build my first 12 bipe and a lot of dubt are appearing, since the plan is a basic kind, and hasnīt got details such the ubication of servos and other things, I am thanksfully if someone could post any pics of the inner part to see the distribution.
I was thinking about moving the elevator servos to the rear, nearly to the tail because the movement of the upper wings causes the nose a little more heavy, and the rudder one conditional to the position cg on the tail or pull pull sistem depends on cg |
Hi , sorry for hooking too late, I am starting to build my first 12 bipe and a lot of dubt are appearing, since the plan is a basic kind, and hasnīt got details such the ubication of servos and other things, I am thanksfully if someone could post any pics of the inner part to see the distribution.
I was thinking about moving the elevator servos to the rear, nearly to the tail because the movement of the upper wings causes the nose a little more heavy, and the rudder one conditional to the position cg on the tail or pull pull sistem depends on cg. excuse me for the english (rudimentary), fly well |
Originally Posted by airnewery
(Post 12301715)
Hi , sorry for hooking too late, I am starting to build my first 12 bipe and a lot of dubt are appearing, since the plan is a basic kind, and hasnīt got details such the ubication of servos and other things, I am thanksfully if someone could post any pics of the inner part to see the distribution.
I was thinking about moving the elevator servos to the rear, nearly to the tail because the movement of the upper wings causes the nose a little more heavy, and the rudder one conditional to the position cg on the tail or pull pull sistem depends on cg. excuse me for the english (rudimentary), fly well As no one seems to be supplying the plans I thought it would be ok to attach them so they can be directly downloaded. If there are objections please let me know and I'll remove them. http://www.rcuniverse.com/forum/imag.../paperclip.png Attached Files Files are both the full size plan and the A3 tiled version. Steve
|
Originally Posted by airnewery
(Post 12301715)
Hi , sorry for hooking too late, I am starting to build my first 12 bipe and a lot of dubt are appearing, since the plan is a basic kind, and hasnīt got details such the ubication of servos and other things, I am thanksfully if someone could post any pics of the inner part to see the distribution.
I was thinking about moving the elevator servos to the rear, nearly to the tail because the movement of the upper wings causes the nose a little more heavy, and the rudder one conditional to the position cg on the tail or pull pull sistem depends on cg. excuse me for the english (rudimentary), fly well As no one seems to be supplying the plans I thought it would be ok to attach them so they can be directly downloaded. If there are objections please let me know and I'll remove them. http://www.rcuniverse.com/forum/imag.../paperclip.png Attached Files Files are both the full size plan and the A3 tiled version. Steve |
All times are GMT -8. The time now is 12:28 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.