what floats for thunder tiger 82" J3 cub
#1
Thread Starter
Join Date: Oct 2006
Location: Kingman,
AZ
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
what floats for thunder tiger 82" J3 cub
Looking for suggestions on what floats to get for my new Thunder Tiger 82" J3 Cub that I plan to dedicate to float flying only. Looking for something in the mid price range.
All suggestions wellcome.
All suggestions wellcome.
#4
My Feedback: (11)
RE: what floats for thunder tiger 82
I looked at the TT website and got the specs on the J3 Cub. Any float around 34-38 inches will work. The step should be a half inch to one inch behind the CG. The center of the floats should be between 1/4 to 1/5 the width of the wingspan, so toughly between 16 and 20 inches. The front of the float should extend beyond front of the plane by an inch or two. A water rudder will help during windy days or slow speed taxi. You can get them from MaxfordUsa here:
http://www.maxfordusa.com/hz-40-fiber-floats-1.aspx
or from Tower
http://www3.towerhobbies.com/cgi-bin...&I=LXE981&P=ML
or you could fabricate them yourself:
http://www.seminolerc.com/EZ-Float-Design.html
That's all I have. Good luck!
Jack
http://www.maxfordusa.com/hz-40-fiber-floats-1.aspx
or from Tower
http://www3.towerhobbies.com/cgi-bin...&I=LXE981&P=ML
or you could fabricate them yourself:
http://www.seminolerc.com/EZ-Float-Design.html
That's all I have. Good luck!
Jack