12 FOOT TELEMASTER FLOAT PLANE
#1
Junior Member
Thread Starter
Join Date: Apr 2007
Location: Frankenmuth,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
12 FOOT TELEMASTER FLOAT PLANE
Does anyone know where I can get some plans or floats for the 12' telemaster? I'm thinking there going they need to be about 72" long. I think the fuse is 90" long, and 80% of the length would be 72". Any ideas on an engine, someone thought a G38? I sure could use some imput. Thanks Jeff
#3
Junior Member
Thread Starter
Join Date: Apr 2007
Location: Frankenmuth,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: 12 FOOT TELEMASTER FLOAT PLANE
Thanks Jim, I really appreciate the help. I was hoping to get a few responses. I'm going to look into the plans you sent me. Thanks again. Jeff
#5
Junior Member
Thread Starter
Join Date: Apr 2007
Location: Frankenmuth,
MI
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: 12 FOOT TELEMASTER FLOAT PLANE
Thanks Seaplane. I checked out the website. I'm really looking into out of these planes, but I just wanted to make sure something was out there for them. The stuff you have looks like a very nice piece. I may get a hold of you if I decide to do one of these planes.
#6
Senior Member
My Feedback: (2)
Join Date: Oct 2003
Location: burnsville,
MN
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
RE: 12 FOOT TELEMASTER FLOAT PLANE
Check with Balsa USA. They have floats kits for thier 1/3 scale Cub that would work fine. I built and I am flying the 12 Foot Telemaster with a G-38. If I was going to fly off of water I would choose a larger engine. Maybe up to a fifty size. The struts aluminum attachment point has a problem with cracking and breaking off. Replace these aluminum with steel.
Good luck
Bob
Good luck
Bob