8' Otter scratch build
I'm about to start a scratch build of an 8 foot ws Otter using plans enlarged from a 6 ft. ws Unionville kit a friend gave me. Has anyone built the Unionville 8 ft. Otter kit?
|
RE: 8' Otter scratch build
I did the 6'. fly's decently enough, but its kind of a pile of **** lol. its not a very scale cross section for the fuse and some of the material choices aren't really adequite, like balsa spars.. if i was scratch building from plans i would add a ton of things, like doors, and formers, and personal taste i would probably fully sheet it and paint it. the tail came out with a really nice shape though. should have tons of room under the cowl. i made a custom functional exhaust pipe on one side.
good luck with her |
RE: 8' Otter scratch build
Thanks, I'll keep you posted. I may use several different mediums in this construction.
|
RE: 8' Otter scratch build
I now have the Print from the 6' Unionville Otter increased to an eight foot wingspan! This thing is huge! While overlooking the new plan I noticed it does not have the horizontal stabilizer and the elevator shown. I must see a 3-view or get the general shape and relative size compared to the wing from somewhere. Any suggestions?
|
RE: 8' Otter scratch build
did it get cut off? its on my plan.
|
RE: 8' Otter scratch build
This print only shows the very end of the horizontal stab and the elevator and has a comment to see scale notes-done as a cut away. There is nothing I can see the full size to construct from. I only have one sheet -do have more?
|
All times are GMT -8. The time now is 07:21 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.