Search: Posts Made By: Xpress
Showing results 1 to 25 of 500
Search took 0.58 seconds.
Forum: Radio Manufacturer Direct Support 02-21-2018, 04:26 PM
Replies: 3
Views: 98
Posted By Xpress
Should both be horizontal to allow for the neck...

Should both be horizontal to allow for the neck strap balancer to be mounted to it. It's just bolted in place with a nut on the other side, it can be rotated.
Replies: 5
Views: 191
Posted By Xpress
The HPP-22 will let you update both your...

The HPP-22 will let you update both your transmitter, its 2.4 module, and your Optima receivers to the latest firmware.
Replies: 2
Views: 238
Posted By Xpress
There is risk of shorting both the charger and...

There is risk of shorting both the charger and the transmitter out, as well as overcharging the battery and causing a fire. The included charger is an NiMH charger that will charge the stock Tx...
Replies: 3
Views: 154
Posted By Xpress
Click on the wrench icon and then the SPECTRA...

Click on the wrench icon and then the SPECTRA menu. Select Optima/Minima for the receiver and then tap on BINDING. Follow the instructions on the screen, it will walk you through.
Replies: 1
Views: 83
Posted By Xpress
Here is a comprehensive list posted on our...

Here is a comprehensive list posted on our website:

2252873
Replies: 1
Views: 65
Posted By Xpress
There was originally a hard copy of the Aurora 9X...

There was originally a hard copy of the Aurora 9X manual but there were so many factual errors in the booklet (due to translation issues and software changes) that it was decided to omit it entirely...
Replies: 10
Views: 190
Posted By Xpress
This is an extremely confusing one, I dare say...

This is an extremely confusing one, I dare say you may have received a defective HPP-21, but there's just no possible way 14 servos in a row were bad. Consider me completely stumped..
Forum: Batteries & Chargers 01-19-2018, 02:21 PM
Replies: 3
Views: 218
Posted By Xpress
Add the capacities together and charge at that...

Add the capacities together and charge at that rate to charge at 1C. Keep in mind all of your packs need to be equal voltage before you start charging.
Replies: 10
Views: 190
Posted By Xpress
What Futaba receiver are you using? There are a...

What Futaba receiver are you using? There are a couple that can only be used with extremely high refresh rate servos of which the HS-5485HB is not. The fact that you say your 72mhz system works fine...
Replies: 10
Views: 190
Posted By Xpress
We have never recommended a 5 cell battery to be...

We have never recommended a 5 cell battery to be used with the HPP-21, roughly 6 volts is its maximum operating voltage. My best guess is that you're pushing too much voltage to the HPP-21 which is...
Replies: 10
Views: 190
Posted By Xpress
What voltage are you operating the servos at? 2...

What voltage are you operating the servos at? 2 servos in a row to have the same issue is exceedingly rare.
Replies: 7
Views: 123
Posted By Xpress
Something is generating RF noise, you do not have...

Something is generating RF noise, you do not have the ignition plugged directly into the receiver do you?

The SPC port only powers the receiver circuit in the receiver, it will not power the...
Replies: 3
Views: 126
Posted By Xpress
Flight Conditions, to summarize, allows you to...

Flight Conditions, to summarize, allows you to create multiple mix and rate profiles within the same model, depending on what kind of airplane you are flying. For most of us it's just a fancy...
Replies: 3
Views: 126
Posted By Xpress
C and S stand for Combined and Single- this is...

C and S stand for Combined and Single- this is only used for flight conditions if you want to retain the same rates and expo settings across multiple flight conditions. OST just offsets the rates to...
Replies: 1
Views: 125
Posted By Xpress
It would be difficult to diagnose over the...

It would be difficult to diagnose over the forums, best to reach out to our service department for further help:

858 748 6948
Replies: 1
Views: 128
Posted By Xpress
I don't know how the programming of that...

I don't know how the programming of that transmitter works but you need to use a 3 position switch assigned to a channel. If the 3 position switch is fixed to a specific channel then you need to plug...
Forum: Batteries & Chargers 12-05-2017, 04:26 PM
Replies: 2
Views: 379
Posted By Xpress
I would suggest the Hitec X2 AC Black Edition....

I would suggest the Hitec X2 AC Black Edition. Compact and powerful for most 3S packs, can be used on either AC or DC, and has a unique voice guide for assisting in programming.

X2 AC Plus Black...
Replies: 1
Views: 88
Posted By Xpress
May be a silly question, but have you ensured the...

May be a silly question, but have you ensured the transmitter is on the same channel as the crystal in the receiver?
Replies: 2
Views: 394
Posted By Xpress
Hitec HS-755HB fits these needs, though you have...

Hitec HS-755HB fits these needs, though you have not stated a size range.

HS-755HB Karbonite Gear, Giant Scale Servo | HITEC RCD USA...
Forum: Batteries & Chargers 11-21-2017, 08:43 AM
Replies: 4
Views: 438
Posted By Xpress
You might take a look at the X2 High Power, 120W...

You might take a look at the X2 High Power, 120W per port on AC power. There is also the D7 charger which is fixed at 200 watts per port on either AC or DC power.

X2 High Power | HITEC RCD USA...
Replies: 9
Views: 374
Posted By Xpress
As mentioned, the dual rates will actually be a...

As mentioned, the dual rates will actually be a triple rates if you assign a 3 position switch for control. Each position of the switch will always have a rate assigned to it.
Replies: 4
Views: 297
Posted By Xpress
We actually have a specific grease we recommend...

We actually have a specific grease we recommend and you can purchase it from Tower:

https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXN741&P=7...
Replies: 4
Views: 208
Posted By Xpress
Glad we could be of service to you!

Glad we could be of service to you!
Replies: 10
Views: 511
Posted By Xpress
The original Aurora 9 can use either the Optima...

The original Aurora 9 can use either the Optima SL or Optima D receiver to get s.bus.



Hi Mark, they have a 14 channel with s.bus that was just introduced:
...
Forum: 3D Flying! 10-06-2017, 07:45 AM
Replies: 21
Views: 1,576
Posted By Xpress
I will respectfully disagree as not all ARF's are...

I will respectfully disagree as not all ARF's are constructed poorly. This is why it pays to be selective with the brands you purchase.
Showing results 1 to 25 of 500



Forum Jump


All times are GMT -8. The time now is 01:01 AM.