Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Search:

Type: Posts; User: keithcitra

Search: Search took 0.08 seconds.

  1. Replies
    12
    Views
    249

    i do no both air boats can not use a wood prop...

    i do no both air boats can not use a wood prop the fly apart the boat is running about 20 pushing water i had the motor in my 36 " shovel nose hydro it ran about 45
  2. Replies
    12
    Views
    249

    the cg is at one third when you are going slow it...

    the cg is at one third when you are going slow it runs good but as soon as you hit the throttle it pushes the front down i wish i had a video i was told to try a smaller prop and lower the motor down
  3. Replies
    12
    Views
    249

    the boat is only about 4 lbs the motor runs about...

    the boat is only about 4 lbs the motor runs about 26,000 rpm the prop is a 10 6
  4. Replies
    12
    Views
    249

    well i have shimmed the engine both ways no help...

    well i have shimmed the engine both ways no help as soon as i hit the throttle the nose goes down if i remeber right the motor is a viago 36 -74 1800 kv i am running 4s 5000 mah 65 c
  5. Replies
    12
    Views
    249

    wellipulled the blocks i had on the back and...

    wellipulled the blocks i had on the back and pulled all the excess weight out sanded the front down still pushing water as soon as i give it throttle the thrust pushes the front down should i put...
  6. Replies
    12
    Views
    249

    will try was told to put the blocks there but...

    will try was told to put the blocks there but will remove have close to a pound and a half of weight in the back amtaking that out two
  7. Replies
    12
    Views
    249

    my airboat is pushing water

    i have 2 airboats one runs great 24 by 12 the other one is 31 by 18 balance point now is 8" from back and it still will not get up on plain it pushes water like a dozer any one no what i need to do
  8. Replies
    4
    Views
    348

    the boat is running a 40 mm 1.4 pitch curved fin...

    the boat is running a 40 mm 1.4 pitch curved fin it balances out at the rear of the sponsons it wieghs about 4.5 with out batteries will a 40 82 leopard 1600 kv run it better
  9. Replies
    4
    Views
    348

    shovel nose hydro

    i built a 40" shovel nose a have a 540 traxis motor the front is hopping when i run it i cant adjust the strut no more what do i do
Results 1 to 9 of 9
All times are GMT -6. The time now is 06:54 PM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.