Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Search:

Type: Posts; User: 600Bob

Page 1 of 6 1 2 3 4

Search: Search took 0.11 seconds.

  1. You should have plenty of RPM and the plane...

    You should have plenty of RPM and the plane doesn't weigh much. Are you sure you have the prop on the right way? You would be surprised at how many people have had a prop on backwards LOL.
  2. Replies
    1
    Views
    168

    The ESC has a higher amp rating than what you...

    The ESC has a higher amp rating than what you should pull with the motor so you should be fine.
  3. Well yes I meant that was 5 clicks of actual down...

    Well yes I meant that was 5 clicks of actual down trim. If it needed 5 clicks up trim to fly right and i gave it 5 clicks back down I would be back to center where I started.

    And yes this is for...
  4. I start with my elevator trim centered and the...

    I start with my elevator trim centered and the elevator surface centered. I then fly and find I need 5 clicks of up elev. trim.

    I then give the TX 5 clicks of down trim. I unhook the linkage and...
  5. Thread: Mah

    by 600Bob
    Replies
    14
    Views
    685

    If the smaller pack voltage sags because of high...

    If the smaller pack voltage sags because of high current draw then the larger capacity pack would sag less so the servos would effectively be operating at a higher voltage and operating closer to...
  6. Replies
    18
    Views
    637

    A 20cc will pull a 1/4 scale Piper Cub, over 100"...

    A 20cc will pull a 1/4 scale Piper Cub, over 100" wingspan, I have a 20cc in a 63" 13+ lb. P-47 which works well but I don't know what type of plane you have, if it's 3D then maybe it might not do...
  7. I too would say the Sig Kadet MkII would be a...

    I too would say the Sig Kadet MkII would be a good plane. Fill that engine with glow fuel, it should free it up.
  8. Replies
    5
    Views
    210

    Uh I didn't know Hangar 9 made a 30cc P-47?...

    Uh I didn't know Hangar 9 made a 30cc P-47? Please send me link I would like to take a look at it. What is the wingspan?

    Okay I looked it up, so no those retracts won't work.

    I'm surprised...
  9. Replies
    5
    Views
    210

    I use the E-flight gear and scale struts. I...

    I use the E-flight gear and scale struts. I think you can find them on eBay too.

    http://www.e-fliterc.com/Products/Support.aspx?ProdID=EFLG410
    ...
  10. Replies
    5
    Views
    210

    I have that plane but use electric retracts so no...

    I have that plane but use electric retracts so no help there. The only thing hurt by the engine sticking out an extra inch is the looks, will it bug you, it would bug me.
  11. Replies
    8
    Views
    374

    How big is it? I have an 88" Tiger Moth, balance...

    How big is it? I have an 88" Tiger Moth, balance it right side up on my finger tips, no balance rig required.
  12. Replies
    17
    Views
    686

    Manuals have been wrong. Not all props are...

    Manuals have been wrong. Not all props are labeled the same. I look at the props airfoil not the numbers.
  13. Replies
    17
    Views
    686

    It looks like the prop is on backwards to me...

    It looks like the prop is on backwards to me also, at least none of mine are on that way and they all fly OK.
  14. Replies
    26
    Views
    1,334

    You can buy LiFe batteries to replace Pb in...

    You can buy LiFe batteries to replace Pb in motorcycles but not LiPo. So LiFe or A123 is closer to what you are looking for.
  15. Replies
    417
    Views
    43,842

    "I've been to the field you mentioned. I...

    "I've been to the field you mentioned. I recognize it from the photo. I went there last year (2014), to the November or December meeting, intending to join. I even brought some modular furniture to...
  16. Thread: Gas engines

    by 600Bob
    Replies
    5
    Views
    286

    I don't have one. I believe when it was first...

    I don't have one. I believe when it was first introduced they used muffler pressure like a glow engine. The new pumped carb wouldn't need it and there is no mention in the manual of using muffler...
  17. Replies
    4
    Views
    285

    I think 18% oil is the common recommend amount...

    I think 18% oil is the common recommend amount for 4 stroke engines but it will probably be fine.
  18. Replies
    173
    Views
    21,161

    It has been some time since I did mine. I did...

    It has been some time since I did mine. I did not assemble the wings to glue them in. Is there any difference between the pieces? I can't tell by looking at them after being installed. Maybe some...
  19. Replies
    9
    Views
    366

    You are welcome :)

    You are welcome :)
  20. Replies
    9
    Views
    366

    Limited stock here:...

    Limited stock here:
    http://www.valuehobby.com/xt60-male-to-ec3-female-adapter.html

    15 here:
    http://www.ebay.com/itm/1-XT60-Male-To-Female-EC3-Connector-Adapter-/330462587127

    10 here but from...
  21. Replies
    9
    Views
    366

    If you can solder just cut off and replace the...

    If you can solder just cut off and replace the XT60 with EC3, or make an adapter lead, or there are a number of pre made adapters chances are you could buy one too.
  22. Replies
    17
    Views
    590

    Huh? FAA regulates full scale aircraft and...

    Huh? FAA regulates full scale aircraft and licensed pilots, not RC models flown line of sight unless you are near an airport. RC transmitters are a Part 15 device, no license required and can be...
  23. Replies
    23
    Views
    1,329

    I don't think you meant to say that the bind plug...

    I don't think you meant to say that the bind plug shorts the + and - leads, that would short out your receiver battery or BEC. The bind plug shorts the Signal and neg. leads of the receiver.
  24. Replies
    23
    Views
    1,329

    Okay, then it doesn't lose "Bind", if it did you...

    Okay, then it doesn't lose "Bind", if it did you would have to go through the bind process again. The flashing light generally indicates a loss of signal. It could be from the antennas being...
  25. Replies
    23
    Views
    1,329

    ^^^Do you have to put the bind plug in and...

    ^^^Do you have to put the bind plug in and re-bind it?
Results 1 to 25 of 136
Page 1 of 6 1 2 3 4
RCU Reviews
All times are GMT -6. The time now is 04:04 PM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.