Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Search:

Type: Posts; User: Flightwerkz

Page 1 of 19 1 2 3 4

Search: Search took 0.96 seconds.

  1. I have run the thermo probe under the mount many...

    I have run the thermo probe under the mount many times in different jets without any issues. There is not enough pressure there to damage it.



    Not going to balance the stab. No need. Anton flew...
  2. Alright, lastly for today, the bell mouth. Like...

    Alright, lastly for today, the bell mouth. Like everyone else, I happen to receive the wrong 160 size bell mouth that was a mistake and if you also got the smaller one, please email John and he will...
  3. I ran two brass tubes all the way to the main...

    I ran two brass tubes all the way to the main hatch area where I will be using a dual output Powerbox smoke pump for turbines.
  4. So below are some pictures of the installation of...

    So below are some pictures of the installation of the see-saw mechanism. If it a pretty straight forward installation. The only thing recommended is that the area inside the rear section where the...
  5. Hey Jamie, sorry been super busy with unrelated...

    Hey Jamie, sorry been super busy with unrelated fun stuff. I have been able to finish a few things. I will post them here in a sec.
  6. Hello Juan What about telemetry for JR's DMSS...

    Hello Juan

    What about telemetry for JR's DMSS Protocol? Is this new self adjusting system using barometric sensing? This technology also exists in Jetcat's RXi line. ECU senses barometric pressure...
  7. Well, I'm the Jr Team member and I used 8611A's...

    Well, I'm the Jr Team member and I used 8611A's for the gear doors but being a Team JR member doesn't help enough to make my decision. I would have gladly spent the cost of two servos to have the...
  8. Looking awesome Craig! Looking forward to Florida...

    Looking awesome Craig! Looking forward to Florida Jets to fly these Hawks!

    I am currently painting the interior for final install of the pipe and turbine so pics on that coming soon. Tanks have...
  9. I got a chance to mess around with the bypass and...

    I got a chance to mess around with the bypass and turbine. I will post pics of how I installed mine. The turbine is a P200SX and it looks right at home! This is a perfect sized engine. On another...
  10. The rudder setup is very simple. I actually...

    The rudder setup is very simple. I actually stopped because I am waiting on some linkages. You basically slide the rudder torque tube through the already installed sleeve. on the inside there are...
  11. Been a few days, have quite a few things going on...

    Been a few days, have quite a few things going on here at home but have had a few days to get some work in. The smaller tank is the smoke tank. I made a small base so that it sits snug up against the...
  12. OOOOOOhhhhh when I see wires like that I think of...

    OOOOOOhhhhh when I see wires like that I think of a big plate of spaghetti and meatballs! Don't know wether to work or get some mozzarella cheese and sprinkle some in there! I like this bird and...
  13. I cut mine a lot because the geometry is totally...

    I cut mine a lot because the geometry is totally different then with the air cylinders.
  14. With the servos, there's no need for locks. As I...

    With the servos, there's no need for locks. As I mentioned, the door cannot open because of the way the geometry is setup.
  15. Today I was able to finish up the main gear door...

    Today I was able to finish up the main gear door servo install. I am ordering some different mounts for the actual servos as I am not a huge fan of those plastic L Brackets and also possibly...
  16. Looks awesome Anton! Don't loose any more...

    Looks awesome Anton! Don't loose any more airplanes in the fog!! Awesome!

    By the way, I have always wanted an airplane I can hang a hop light inside to do work!
  17. As I mentioned before, I am using servos to...

    As I mentioned before, I am using servos to actuate my front and main doors. I chose to use this method of opening doors because I am not a fan myself of the traditional door slapping closed and...
  18. The JR arms are threaded so I used a 4-40 ball...

    The JR arms are threaded so I used a 4-40 ball link on the servo side and a clevis on the flap side because the Ball link would have not been slim like the clevis. The clevises that come with the kit...
  19. Nose landing gear servo install is a breeze!...

    Nose landing gear servo install is a breeze! Great work on the design. I went ahead and removed the whole thing from the airframe since its very easy by taking out 4 bolts. The only issue I had was...
  20. Alright, next step is the nose gear and nose gear...

    Alright, next step is the nose gear and nose gear doors. I will be removing the air cylinders and installing two 8411 servos to actuate the front doors. With the 28X, I have enough outputs to be able...
  21. Alright I am back at it. So today I was able to...

    Alright I am back at it. So today I was able to finish the other wing. As far as the cover for the aileron, I made a small opening for a screw up front and made a small piece out of wood towards the...
  22. Enjoying New Years and family. Jet building on...

    Enjoying New Years and family. Jet building on the back burner for a couple days.
  23. I will post those pictures when I get it done on...

    I will post those pictures when I get it done on the other wing here next. This was the "figure everything out" wing and the next I will take some more pics.
  24. Its 32.5" long Jay. Easy to remove as well.

    Its 32.5" long Jay. Easy to remove as well.
  25. For those who have drop tanks, in the wing, there...

    For those who have drop tanks, in the wing, there are two dowels that were installed from the top to the bottom of the wing internally. If you look very closely at an angle, you can see where they...
Results 1 to 25 of 459
Page 1 of 19 1 2 3 4
RCU Reviews
All times are GMT -6. The time now is 03:46 PM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.