Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Search:

Type: Posts; User: bikerbc

Page 1 of 40 1 2 3 4

Search: Search took 0.25 seconds.

  1. Replies
    18
    Views
    337

    Its not all that high . A good extension ladder...

    Its not all that high . A good extension ladder and then a long extension pole like they use for pruning and you should be able to reach it . Or set a fire ,call the fire Dept. and when they come ask...
  2. I am glad to hear that you already have flying...

    I am glad to hear that you already have flying experience . I have a few electrics too and find that I can use the same RX's in some of them but I have gone from glow to elect not elect to glow so I...
  3. I took a look at the stuff on e Bay that lone...

    I took a look at the stuff on e Bay that lone Star Charles found for you too look at . I would not use the battery myself because even if it was new it is only a 4 cell battery 4.8 V and Spektrum...
  4. before You tven try to start your engins I woulld...

    before You tven try to start your engins I woulld compltly replace the fuel systems . Tank and lines . You might be able to salvage your old tank but its hardly worth it . You have a good radio...
  5. Thread: elevons

    by bikerbc
    Replies
    5
    Views
    117

    It must be a setting in your radio. Go back to...

    It must be a setting in your radio. Go back to the beginning and start over .
  6. Replies
    8
    Views
    399

    I would like to add that BUSA has great customer...

    I would like to add that BUSA has great customer support too . If there is something that you don't understand you can give them a call and they will explain things over the phone . Also if you...
  7. Replies
    10
    Views
    317

    I have built the BUSA 1/4 Scale Cub ,and the Sig...

    I have built the BUSA 1/4 Scale Cub ,and the Sig 1/4 Scale Cub ,the BUSA 1/3 Scale Cub . The 1/4 scale are much easier to transport and the Sig Cub is the easiest to set up at the field . I like the...
  8. Replies
    7
    Views
    268

    I have never done anything to fuel proof them and...

    I have never done anything to fuel proof them and so far they have been fine .
  9. Replies
    3
    Views
    583

    I think anything you put on overtop as a patch...

    I think anything you put on overtop as a patch will show up worse than your small blemish .I would try and just spray a light coat of primer right over top of the spot and then just give it a touch...
  10. Replies
    114
    Views
    9,293

    Do you need the extra weight of the G26 to help...

    Do you need the extra weight of the G26 to help it to balance? The G26 is a good deal heavier than something like the DLE20 .or the DLE 30 .. I have both engines and they both run great. The G26 is...
  11. Replies
    114
    Views
    9,293

    What does "need" ever have anything to do with...

    What does "need" ever have anything to do with what we want ?
  12. Replies
    3
    Views
    383

    It sounds like the reciever tube must be moving...

    It sounds like the reciever tube must be moving and if it is your going to need to go in and secure it . If not and there is that much play I would think it should be replaced . I am only guessing...
  13. Replies
    1
    Views
    835

    Sure you can fit them in . You will need to do...

    Sure you can fit them in . You will need to do some work though . It depends what kind of wing you have . Foam or built up . Retracts are a fair amount of work . It depends on the type of retratcs...
  14. Hi Leroy , I am not able to enlarge the pictures...

    Hi Leroy , I am not able to enlarge the pictures for some reason , it tells me that the web page has a redirect loop , I am not able to make out much from the pics. Is that the bottom of the cowl ?...
  15. Replies
    48
    Views
    1,834

    I would try hooking up a reciever with a servo in...

    I would try hooking up a reciever with a servo in the elevator spot C/W a battery and switch etc Bind it to your Transmitter and turn it all on around the same time you had the interferience and...
  16. Replies
    5
    Views
    268

    Welcome to the hobby Big Vic . You are in for the...

    Welcome to the hobby Big Vic . You are in for the most amazing times
  17. Replies
    38
    Views
    1,024

    Yes Tom I believe your rite ,I think I read that...

    Yes Tom I believe your rite ,I think I read that someplace Cub's must be powerd by four stroke engines . I hope you love your Cub enough when it is finished to put it aside for a short while , while...
  18. Replies
    48
    Views
    1,834

    Maybe you could try some expo on the elevator and...

    Maybe you could try some expo on the elevator and see if that helps .Its not hard to over control . Does this happen at other sites or only at home? Is it always in the same spot going in the same...
  19. Replies
    48
    Views
    1,834

    You have changed your radio gear so you should be...

    You have changed your radio gear so you should be able to rule out radio gear as long as you are on 2.4 . If this is something that is happening only to you then it must be something that you are...
  20. Replies
    14
    Views
    459

    I don't see the transmitter anywhere . Do you...

    I don't see the transmitter anywhere . Do you have it along with it's charger? There should be a reciever and battery pack in the plane that may or may not use the same charger as the transmitter . ...
  21. Replies
    9
    Views
    306

    You could get a complete ready to fly package...

    You could get a complete ready to fly package that would not break the bank . An Apprentice is a pretty good flying plane . You can get all the different pieces for it if you break something and you...
  22. Replies
    14
    Views
    459

    Dynarider33 I agree with SeaJay You will not get...

    Dynarider33 I agree with SeaJay You will not get much for it if you sell it . You can tell its been sitting . The head bolts are rusty ..Have you tried to turn the prop or move the throtle back and...
  23. Replies
    6
    Views
    192

    I would think you should paint first . I am just...

    I would think you should paint first . I am just guessing though . I havent done that so far .
  24. Replies
    4
    Views
    239

    You should be able to make your own pattern for...

    You should be able to make your own pattern for the side windows . ,We would need to know what 1/5 scale kit you are working on to know about your windshield . Not all of them are the same . The...
  25. Replies
    49
    Views
    1,644

    When you build a kit you invest a fair amount of...

    When you build a kit you invest a fair amount of time so its important not to build something thats to far beyond your skill level and your club buddies should be able to give you some guidance...
Results 1 to 25 of 1000
Page 1 of 40 1 2 3 4
RCU Reviews
All times are GMT -6. The time now is 08:52 PM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.