Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Search:

Type: Posts; User: westoakmech

Page 1 of 2 1 2

Search: Search took 0.15 seconds.

  1. Those tires are pretty massive. What is the...

    Those tires are pretty massive. What is the gearing in it. If it was not geared down, you will probably have problems with it due to those large tires. If the engine runs until it gets warm, dies,...
  2. Replies
    5
    Views
    95

    +1 it sounds too rich. Try to lean it out a...

    +1 it sounds too rich. Try to lean it out a little at a time and see if that helps you out any.
  3. Replies
    6
    Views
    87

    You are welcome sir.

    You are welcome sir.
  4. Replies
    5
    Views
    95

    Check your transmission, and your bearings in...

    Check your transmission, and your bearings in your rear hubs for binding. Also make sure the front tires spin free. They can be over tightened on a rustler, there is no spacer in the wheel, between...
  5. Replies
    6
    Views
    87

    So are the wheel turning when you try to start...

    So are the wheel turning when you try to start it, with it off of the ground. If so, and you just changed the clutch shoes, I would say that you have a bad bearing in the clutch bell. Something would...
  6. Replies
    4
    Views
    69

    Ok according to redcatracing.com stock...

    Ok according to redcatracing.com stock replacement is 06045 The improved is still plastic 02051t And the 102261 is purple aluminum.
    So as with the knuckles, and c-hubs for the caldera, do you...
  7. Replies
    2
    Views
    72

    thats cool, not gonna build a speed demon or...

    thats cool, not gonna build a speed demon or anything, just a parking lot basher. Maybe in the 50 to 60 mph range. I have a 2000. and a 2250 kv motor that would be a great fit. I have read some other...
  8. Replies
    2
    Views
    72

    What is a god on road car.

    Hello all, I have been wanting to get an on road car. I have had one in the past, I had a nitro 4tec many years ago. I have ran nitro and electric, trucks, and buggies, for a long time. I have been...
  9. Replies
    4
    Views
    69

    yeah 02051t is supposed to be the same part,...

    yeah 02051t is supposed to be the same part, revised. They are the same price, but what is if any are the differences in the revised part. I was just wandering, is it supposed to be better?
  10. Replies
    4
    Views
    69

    Volcano s30 question

    My son has a volcano s30. Today he broke the rear suspenion pin mount. When I was looking for parts, there is two. One is part #06045, The other is a revised version, part #02051t. Does anyone know...
  11. Replies
    1
    Views
    60

    That would be a good combo, you could run 3s if...

    That would be a good combo, you could run 3s if you wanted. The 35a would be good with nihm, and ok with 2s lipo. The 60a would be the better, if you run nihm, or 2s lipo, pretty much no worries...
  12. 4300 would be good. If you want more torque, you...

    4300 would be good. If you want more torque, you go lower, if you want more speed you goe higher. Like a 5700 kv, would run faster topend, than a 4300, because it is gonna turn more rpms. With nihm,...
  13. Look at the ez-run set up. At hobbypartz.com,...

    Look at the ez-run set up. At hobbypartz.com, they are $76, and that is the motor, esc, and a program card. Like I said redcat is running ez-run set ups, so it is basicily the same thing the epx pro...
  14. You don't have to sell it. Just convert it, not...

    You don't have to sell it. Just convert it, not much difference to the epx pro. You can buy the redcat brushless set, pretty resonable, or the possibilties are endless. My son has a volcano, that...
  15. Its kinda hard to say, not much traxxas left on...

    Its kinda hard to say, not much traxxas left on it. What I can tell, it is an early one, short chassis, maybe wide suspension, hard to tell for sure. It is a black trans, points to older, early, or...
  16. You can run whatever mah you want, it will not...

    You can run whatever mah you want, it will not hurt anything at all. You should not need to adjust the low voltage for nihm, that is for lipos
  17. Looks to be an older t-maxx after market chasis,...

    Looks to be an older t-maxx after market chasis, with aluminum arms. For sure chevron tires.
  18. Replies
    0
    Views
    419

    Hobby shop in Stillwater OK

    Hello does anyone know if there is a hobby shop still open in Stillwater OK. About a year ago there was a guy on here asking about becoming a redcat dealer there. I am going there this weekend and...
  19. RE: Davis Model Products Heavy Duty Rod Traxxas 2.5/3.3

    I have run one. Not all that impressed with it, it does the job, is a little heavier, did not notice any real performance loss from the weight.  My problem was that after about five gallons, the...
  20. Replies
    1
    Views
    228

    RE: 2.2

    You can run gladiators, they are larger square pins. You could also look into bad lands. Both are pro line. The bad lands may only be available in 2.8.
  21. Replies
    3
    Views
    294

    RE: 3.3 slipper for 2.5 Maxx

    The only down fall to running that kit is I think there is only the one gear 72t that will work with it. It looks like the same spur gear, but it has a concave in it, so the others will not work. If...
  22. Replies
    3
    Views
    698

    RE: E Revo issues

    The stock traxxas servo for the 1/16 is notorious for going bad and doing just that. Did you buy the servo? or did it come with the car? It may have been bad already. I am running a hitec metal...
  23. RE: serious issue with t-maxx 3.3 please help

    It could have pulled the ears off from the bottom of the piston, where the wrist pin goes though. It will still have some compression, but not enough. I had that happen on a 2.5 that over sped. I...
  24. Replies
    2
    Views
    347

    RE: T-Maxx 2.5 take it or leave it?

    Looks like a pro .15 engine, also looks like it is missing two front shocks. Also looks to be reverse trans, with no servo. Looks really clean though, For around a $ 105 you could buy a 2.5r engine...
  25. RE: How to install a .28 nitro engine on a traxxas 3.3 tmaxx

    I have not ever done it. But I know that you would for sure at least need a chasis extension, and a big block mount. Other than that I can be of much help to you. Good luck
Results 1 to 25 of 31
Page 1 of 2 1 2
All times are GMT -6. The time now is 09:57 AM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.