Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Search:

Type: Posts; User: pcnewman

Page 1 of 4 1 2 3 4

Search: Search took 0.36 seconds.

  1. Tilt and pan from a DX6i? Anyone fimiliar with Dionysusdesign products?

    I plan to use a gopro hero hd for aerial video from a Bixler v1.1. The plan is to use the gear and flaps switches on my Spektrum DX6i to control 2 servos on the camera. One for 90 degree pan right...
  2. RE: Dynam Peaks Pitts servo will not center and ESC issues

    The aileron servos are 9g's the rudder(the problem child) and elevator servos are 17g.
    I looked under PARTS for this plane and found this:
    DY-1009 17g servo specs:
    Operating Speed:...
  3. RE: Dynam Peaks Pitts servo will not center and ESC issues

    ESC I dont know how I didnt see what you pointed out in the instructions. I went thru this proceedure and all seems fine. Thanks.
    Anyone know the specs on the stock servo?
  4. RE: Dynam Peaks Pitts servo will not center and ESC issues

    OPJOSE
    Thanks for the reply. Lots of good info.
    1-No binding. I had already broken hinges in. But tried with pus rods disconnected.
    Gears seem to be fine. It will center now and then. I worked...
  5. RE: Dynam Peaks Pitts servo will not center and ESC issues

    Will do on the servos. I did work the servo back and forth (with the Tx) for about 10 minutes trying to clean up the servo motor. Made a big difference. I think I will still swap them out though.
    ...
  6. Dynam Peaks Pitts servo will not center and ESC issues

    I just sent the followng letter to Nitroplanes. Have ay of you had the same problems?:

    I received my order in great shape and on time.
    I do have a problem with the rudder servo though.
    It...
  7. Replies
    3
    Views
    1,115

    RE: Art Tech Yak 54 from HK. CG? Motor?

    Wound up with no weights at all and it flew fine. Dont remember where that put the cg though. The geared inrunner had plenty of power but the spur gear stripped out where the prop shaft was splined....
  8. Replies
    142
    Views
    14,628

    RE: Katana 50 by Hangar 9

    Videos?
    I just got one and a Magnum 91 FS.
  9. Replies
    359
    Views
    73,789

    RE: E-flite Taylorcraft

    I went with the T craft 450. Used the 450 motor and VERY happy with it. A friend has the same plane with a 480. Faster, climbs vertical a bit farther but the 450 does real nice. I put 3" wheels on...
  10. Replies
    94
    Views
    8,208

    RE: Great Planes Super Chipmunk EP arf

    Nice review. any video?
  11. Replies
    94
    Views
    8,208

    RE: Great Planes Super Chipmunk EP arf

    I wound up going with the Taylorcraft (very nice plane) but wouldstill like to know how the build and flight goes. keep us posted.
  12. RE: E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    Hetr,
    How long are you able to fly on the 2200ma batts? I have 4, 2200's but I also have a bunch of 1300's and would like to figure out how long I could fly with them. If it can stand the weight,...
  13. RE: E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    Not familiar with that motor. Whats the kv. What battery are you using and how long are you flying?
  14. RE: E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    I'm in the southern US. Couldn't stand the cold as long as you guys have it. I'm with you on the old cold fingers. I just received a Turnigy radio glove and heater from Hobbyking $38.00 with...
  15. RE: E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    Thanks for all your feed back. It's been to windy for me to try mine out yet. Hopefully this weekend.
  16. RE: E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    Hetr, are you using a 10x7E or SF. SF's draw a little more and may be closer to the recommended 10x8E. may not have any benefit?
  17. RE: E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    Thanks, good news. Hopefully I have her up this weekend.
  18. RE: E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    2100ma 3s and a 20a ESC. Just got off the phone w/Eflite support. They said static test does not represent anything. and that all planes are tested for proper set up. I guess I'll try the 10x7 I have...
  19. Replies
    359
    Views
    73,789

    RE: E-flite Taylorcraft

    Probably should have posted this here.
    http://www.rcuniverse.com/forum/m_11312708/tm.htm
  20. E Flight Taylorcraft w/Park 450 recomended prop 10x8 is too much?

    I just built the Taylorcraft 450 with Eflite Park 450 motor. the recommended prop is a 10x8. I wasn't able to find a 10x8 so I bought a 10x7. I did static test and found that the 10x7 would draw just...
  21. Replies
    94
    Views
    8,208

    RE: Great Planes Super Chipmunk EP arf

    Yeah please do let us know. I've been debating between the Chipmunk and the Taylorcraft. I have an E Flite Park 450 and (4) s75 servos and a 20a ESC looking for a new ride.
  22. Replies
    359
    Views
    73,789

    RE: E-flite Taylorcraft

    Time to replace my Flyzone Select Scale Super Cub. I think the Taylorcraft will fit the bill nicely. I have an E Flite Park 450 and (4) S75 servos and a 20a speed control looking for a new ride. Have...
  23. RE: E-flite s75 servo chatter help please video

    Bec is 5v 2.0a. no flight yet.
  24. E-flite s75 servo chatter help please video

    http://www.youtube.com/watch?v=9SqhcdCjMpA
  25. Replies
    4
    Views
    608

    RE: Richmodels Edge 540-40 with ASP .91

    Same post on RCGroups. Im still undecided. H-9 is pricey but you can get replacement parts. RIchmodels you cant get parts for but you could buy 2 models for the price of 1 H-9. I saw the H-9 Katana...
Results 1 to 25 of 96
Page 1 of 4 1 2 3 4
All times are GMT -6. The time now is 11:54 AM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.