Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Search:

Type: Posts; User: drdoom

Page 1 of 40 1 2 3 4

Search: Search took 1.53 seconds.

  1. Great info ordered one for 35. Hope they come up...

    Great info ordered one for 35. Hope they come up with one for the DLE-20ra
  2. I ran it with a 16 x 6 glass prop. 10000 RPM....

    I ran it with a 16 x 6 glass prop. 10000 RPM. this little engine is a power house. These gas engines are fantastic and they don't burn any gas. It is getting much easier to start.
  3. Pix, I usually do a better job on the wiring....

    Pix, I usually do a better job on the wiring. Might straighten it out later
  4. Ill bet it flies fantastic. Again I'm not...

    Ill bet it flies fantastic. Again I'm not interested in 3D. just an everyday plane. It seems light compared to the rest of my stuff. I got my props today and It is ready to maiden. Hopefully Sunday...
  5. I guess that the ignition could be moved into the...

    I guess that the ignition could be moved into the cowl. it is so light and already ahead of CG. Ill get a few Pix.
  6. Well, Balance day is here and it is tail heavy....

    Well, Balance day is here and it is tail heavy. Even with the 2 elevator servos removed from the back of the fuse. If I had to do it all over again, Id use the DLE-30. It could use the extra weight....
  7. One thing I attended to was the spring loaded...

    One thing I attended to was the spring loaded tail wheel assembly. I noticed that it didn't turn the wheel when the rudder had total travel. and if it did , it didn't recenter. I ran a piece of the...
  8. Thanks, RCU is a wonderful tool in the R/C WORLD.

    Thanks, RCU is a wonderful tool in the R/C WORLD.
  9. Your right, I ordered new propellers today....

    Your right, I ordered new propellers today. several sizes. I have a Aluminum 3 blade spinner i need to get a spinner nut for. but not sure what the thread is.
  10. My DLE 20RA is proving to be difficult to hand...

    My DLE 20RA is proving to be difficult to hand start. I've had to break down and use a starter which melted the spinner. I finally got it started, ran it cor 45 minutes. I accidently got a...
  11. Great. Ill be test running the DLE this evening....

    Great. Ill be test running the DLE this evening. I got the aileron servos installed.
  12. You have to shave out the triangle stock to get...

    You have to shave out the triangle stock to get the motor mounts to mount on the firewall flat. The bottom triangle needs to be removed completely for the muffler. The carb is now blocking the hole...
  13. DLE-20ra sitting in the mounting rails. It is...

    DLE-20ra sitting in the mounting rails. It is going to take some work to get it to fit.2022154
  14. I used a rubber band to install the gear to fuse...

    I used a rubber band to install the gear to fuse fairings. this they can move around and not break loose.
  15. It has typical fiber cloth hinges. I'm use to...

    It has typical fiber cloth hinges. I'm use to jets that weigh 25 lbs, and It is not important to me because I have no intentions of flying 3D. Il try to get it weighed when it is ready to fly.
  16. I put 3/16 bass wood under the top edge all the...

    I put 3/16 bass wood under the top edge all the way around. Where the hatch is. You cant see but I'm still impressed with this kit.Im using a single arrow shaft with 2 exits for the elevator.
  17. Yes they are keyed and are installed with a 4/40...

    Yes they are keyed and are installed with a 4/40 socket head cap screw. Best hardware in a kit ive seen in a while. I normally toss the hardware bag and use my own stuff. Unbelievable value for $200...
  18. Well I broke down and ordered the DLE 20RA gas...

    Well I broke down and ordered the DLE 20RA gas engine for mine.I don't think the DLE 35 will fit without major surgery I am really impressed how well this model is done. It seems really light to...
  19. I am really impressed with the hardware that...

    I am really impressed with the hardware that came with the kit. Nice stuff.2020889
  20. More Pix the colors are very nice.

    More Pix the colors are very nice.
  21. Ill see what can do. It is going to be a...

    Ill see what can do. It is going to be a beautiful model. I want to go with a gasser. I think my DLE 35RA May be ok for power, It would take Quite a bit of work betting it in t he cowl.
  22. The model is larger and Much nicer than thought...

    The model is larger and Much nicer than thought it was. They just keep getting better. Mine arrived flawless without any issues. covering was tight and the paint on the cowl is excellent.
  23. This is good information. Thanks. My kit is out...

    This is good information. Thanks. My kit is out for delivery I'll post a few pix later.
    which is better Turnegy or the RCG 26 CC CLASS engine???
  24. Replies
    33
    Views
    1,092

    Shipping Creight may be lost in the Bermuda...

    Shipping Creight may be lost in the Bermuda Triangle... LOL ;) I wonder if it could be license issues with American Champion?
  25. Some of the civil aircraft models do, but I think...

    Some of the civil aircraft models do, but I think this looks good. But I have never seen a real S Bach. I needed a daily flyer. something no hassle.
Results 1 to 25 of 1000
Page 1 of 40 1 2 3 4
All times are GMT -6. The time now is 09:45 PM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.