Surface Detail Set for P-47 TFGS
#1
Thread Starter
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
Surface Detail Set for P-47 TFGS
Complete rub-on vinyl surface detail set designed for the TF giant scale P-47 or any other similar size (~85" span) Jug. Laser cut from high quality sign vinyl in a brushed aluminum color. Both razorback and bubble top sets are available. The package includes the following:
- Just over eleven thousand rivets (.060" diameter by .030" spacing)
- Approximately 1000 Phillips screw heads
- Approximately 350 Dzus fasteners
- Hatches, panels, inspection covers, "saw tooth" leading edge panels for the tail surfaces, etc.
These are designed to be applied on top of a primer base and then painted over. The brushed aluminum color provides a perfect base for weathering effects. Can also be applied to a finished model if you are wanting to duplicate a natural metal finish but a clear coat is recommended to seal the details in place. The larger details are simply "peel and stick" while the rivets and fasteners are applied using clear tape as the transfer medium. A video showing the rivet application process can be seen here: https://www.youtube.com/watch?v=GSGHQzYBmI
Other detail sets are available for the P-51, Corsair, FW-190, Spitfire, and many more and in many different scales. Happy to answer any additional questions you may have either here, or you can email me directly at [email protected]. Quite happy to ship worldwide if you are willing to cover the shipping fees. Thanks for looking!
- Just over eleven thousand rivets (.060" diameter by .030" spacing)
- Approximately 1000 Phillips screw heads
- Approximately 350 Dzus fasteners
- Hatches, panels, inspection covers, "saw tooth" leading edge panels for the tail surfaces, etc.
These are designed to be applied on top of a primer base and then painted over. The brushed aluminum color provides a perfect base for weathering effects. Can also be applied to a finished model if you are wanting to duplicate a natural metal finish but a clear coat is recommended to seal the details in place. The larger details are simply "peel and stick" while the rivets and fasteners are applied using clear tape as the transfer medium. A video showing the rivet application process can be seen here: https://www.youtube.com/watch?v=GSGHQzYBmI
Other detail sets are available for the P-51, Corsair, FW-190, Spitfire, and many more and in many different scales. Happy to answer any additional questions you may have either here, or you can email me directly at [email protected]. Quite happy to ship worldwide if you are willing to cover the shipping fees. Thanks for looking!
#4
Thread Starter
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
Much appreciate!
Chad Veich
#6
Thread Starter
My Feedback: (60)
Join Date: Dec 2001
Location: Litchfield Park,
AZ
Posts: 7,677
Likes: 0
Received 25 Likes
on
23 Posts
Thanks!