Go Back  RCU Forums > RC Airplanes > RC Jets
Reload this Page >

Painter Needed

Notices
RC Jets Discuss RC jets in this forum plus rc turbines and ducted fan power systems

Painter Needed

Old 02-23-2017, 09:23 AM
  #1  
Leardriver
Thread Starter
My Feedback: (12)
 
Leardriver's Avatar
 
Join Date: Apr 2002
Location: Bridgewater, NJ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default Painter Needed

Hey guys....well it looks as though the person I was hoping to fit me in simply cannot get to my project in time for Joe Nall (which is kinda my goal) so wanted to see if anybody knows of a person in the north east that they recommend and might be available to paint my Paritech Viper? She is a BIG Girl! LOL! Im not quit ready for paint which makes it even tighter, but I am trying!

Getting this thing done has been a challenge to say the least, but the paint is the real stumbling block. Soooo........anybody got a guy?

Worst case.....it doesnt get done and my guy Dan can do it early summer. But still would like to have it at the Nall!


PaulP
Old 02-24-2017, 03:55 PM
  #2  
Leardriver
Thread Starter
My Feedback: (12)
 
Leardriver's Avatar
 
Join Date: Apr 2002
Location: Bridgewater, NJ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default

Really? Nobody knows of a painter??
Old 02-24-2017, 05:03 PM
  #3  
marcpamjoce
Senior Member
 
Join Date: Aug 2010
Location: Down Unda, MB, UGANDA
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Default

If you are located in the NorthEast i would definitely give Fact-O-Bake a call. I know they paint cars, but they will put a nice shine on your jet as well. They recently did my FlyEagle and it was amazing. If i'm not mistaking, i think it actually sped my jet up a bit due to the low friction honeycomb paint. I highly recommend them If all else fails, you can box it up and send to FlyEagle, they will also paint your jet for you. I think they will complementary go through your jet and reinforce all weak areas for a nominal fee. Don't rule this out as well. Good luck and happy flying.
Old 02-24-2017, 05:27 PM
  #4  
Leardriver
Thread Starter
My Feedback: (12)
 
Leardriver's Avatar
 
Join Date: Apr 2002
Location: Bridgewater, NJ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default

Well this is not a Fly Eagle jet..it's a Paritech/Tomahawk Viper Jet Kit. I don't think I would want fly eagle going through my plane after I just competed the build myself. I'm just looking for a painter as I really do not have the space to paint a 120" long jet! Plus booth... etc!

I am am not familiar with Fact-O-Bake. Are they a custom car shop?
Old 02-24-2017, 05:42 PM
  #5  
mr_matt
My Feedback: (10)
 
mr_matt's Avatar
 
Join Date: Dec 2001
Location: Oak Park, CA,
Posts: 10,446
Likes: 0
Received 12 Likes on 10 Posts
Default

So good!
Old 02-24-2017, 07:41 PM
  #6  
SECRET AGENT
My Feedback: (18)
 
SECRET AGENT's Avatar
 
Join Date: Mar 2002
Location: Bush, LA
Posts: 1,260
Likes: 0
Received 1 Like on 1 Post
Default

The Ugandan Warrior strikes again! Ha!
Old 02-24-2017, 08:16 PM
  #7  
Zeeb
My Feedback: (41)
 
Zeeb's Avatar
 
Join Date: Nov 2004
Location: St George, Utah UT
Posts: 5,684
Received 65 Likes on 52 Posts
Default

WOW, he got his jet painted with "low friction honeycomb paint". Wait a minute, I don't know what that is, anyone else???? lol
Old 02-24-2017, 11:16 PM
  #8  
Leardriver
Thread Starter
My Feedback: (12)
 
Leardriver's Avatar
 
Join Date: Apr 2002
Location: Bridgewater, NJ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default

Nope.....but it really is a shop in Louisiana/Florida! I am guessing it's a "Maico" kinda deal....cheap. Lol! Never heard of it up here in the NE. Seriously though....nobody has a recommended Paint Guy in the Northeast???
Old 02-25-2017, 12:04 PM
  #9  
ravill
My Feedback: (11)
 
ravill's Avatar
 
Join Date: Jan 2003
Location: Granite Bay, Ca
Posts: 5,704
Received 90 Likes on 72 Posts
Default

Even you don't get your jet painted there, you should send it over so Fly Eagle Jet can give it a good once over. You can never be to safe!
Old 02-25-2017, 12:05 PM
  #10  
ravill
My Feedback: (11)
 
ravill's Avatar
 
Join Date: Jan 2003
Location: Granite Bay, Ca
Posts: 5,704
Received 90 Likes on 72 Posts
Default

And in all truth, we ALL need painters. If we had painters we'd have way more jets. This is why I've learned (although poorly) how to paint my own stuff.

Good luck!
Old 02-25-2017, 12:15 PM
  #11  
Leardriver
Thread Starter
My Feedback: (12)
 
Leardriver's Avatar
 
Join Date: Apr 2002
Location: Bridgewater, NJ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default

Yea I can do it, but I need a booth and some space to do it in!
Old 02-25-2017, 02:06 PM
  #12  
SECRET AGENT
My Feedback: (18)
 
SECRET AGENT's Avatar
 
Join Date: Mar 2002
Location: Bush, LA
Posts: 1,260
Likes: 0
Received 1 Like on 1 Post
Default

Do you realize how many jets are painted in the back yard with rattle can paint? Heck, I'd bet Tom Perry can paint an airplane while mowing his yard! And probably has! HA!
Old 02-25-2017, 02:25 PM
  #13  
BlueBus320
My Feedback: (57)
 
Join Date: Mar 2002
Location: Rockville Centre
Posts: 1,674
Received 3 Likes on 2 Posts
Default

I see you are in NJ, are you aware of Dan Davidson? Also if you run out of time, you could do vinyl to get you through the season. I just did my 2.5 Futura from a local guy in Long Island.
Jay
Old 02-25-2017, 02:31 PM
  #14  
BlueBus320
My Feedback: (57)
 
Join Date: Mar 2002
Location: Rockville Centre
Posts: 1,674
Received 3 Likes on 2 Posts
Default

Obviously it won't fly as well as if you use Fly-Eagle friction free honeycomb paint, but it'll get you going until you can ship it to them.
Jay

Last edited by BlueBus320; 02-25-2017 at 02:34 PM.
Old 02-25-2017, 03:39 PM
  #15  
Leardriver
Thread Starter
My Feedback: (12)
 
Leardriver's Avatar
 
Join Date: Apr 2002
Location: Bridgewater, NJ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by BlueBus320
I see you are in NJ, are you aware of Dan Davidson? Also if you run out of time, you could do vinyl to get you through the season. I just did my 2.5 Futura from a local guy in Long Island.
Jay
Dan is the guy I will have do it if nothing else works out.... but he can't even look at it till June! I thought about vinyl but it's def not my first choice. I can do it myself... have the equip and have done it before, but don't have a booth or really the space for an airplane this size. Pretty much needs a car size booth! Lol! It's huge. And for what's in this plane I really am not willing to just "throw paint on it" and be disappointed. Way too much time and effort into this thing... not to mention $$$! So kinda want a nice finish on it.
Old 02-25-2017, 08:17 PM
  #16  
BlueBus320
My Feedback: (57)
 
Join Date: Mar 2002
Location: Rockville Centre
Posts: 1,674
Received 3 Likes on 2 Posts
Default

I was in the exact same boat as you are. I was excited to work withDan for the 1st time, but decided to bring it by a local vinyl shop to see what they say. I'm very happy with the results, but it is just a sport jet. I can paint as well, but it's hard with space required, fumes if I paint in my basement, overspray if I paint outside etc etc.
anyways, good luck & if you decide to try vinyl I can shoot you my shops contact info. Also Nirlybuilt does paintwork. If you haven't met Nir, he is a great guy to work with.
Jay
Attached Thumbnails Click image for larger version

Name:	IMG_3721.JPG
Views:	93
Size:	2.23 MB
ID:	2202855  
Old 02-25-2017, 08:51 PM
  #17  
RJE
My Feedback: (13)
 
RJE's Avatar
 
Join Date: Apr 2002
Location: Chico, CA,
Posts: 186
Likes: 0
Received 0 Likes on 0 Posts
Default

Did the vinyl add more more weight than paint to the model?
Old 02-25-2017, 08:55 PM
  #18  
BlueBus320
My Feedback: (57)
 
Join Date: Mar 2002
Location: Rockville Centre
Posts: 1,674
Received 3 Likes on 2 Posts
Default

Originally Posted by RJE
Did the vinyl add more more weight than paint to the model?
I doubt it. It was already white gel-coat, so the vinyl is only the colored portions. I think it's lighter, looks good, & super easy to repair/replace.
Jay
Old 02-25-2017, 09:48 PM
  #19  
Leardriver
Thread Starter
My Feedback: (12)
 
Leardriver's Avatar
 
Join Date: Apr 2002
Location: Bridgewater, NJ
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by BlueBus320
I was in the exact same boat as you are. I was excited to work withDan for the 1st time, but decided to bring it by a local vinyl shop to see what they say. I'm very happy with the results, but it is just a sport jet. I can paint as well, but it's hard with space required, fumes if I paint in my basement, overspray if I paint outside etc etc.
anyways, good luck & if you decide to try vinyl I can shoot you my shops contact info. Also Nirlybuilt does paintwork. If you haven't met Nir, he is a great guy to work with.
Jay
Your Futura does look really good! And yes, I am familiar with Nir.
Old 02-26-2017, 05:51 AM
  #20  
LimitDwn
My Feedback: (21)
 
Join Date: Jun 2010
Location: , PA
Posts: 205
Received 13 Likes on 11 Posts
Default

http://www.rcuniverse.com/forum/rc-j...-painting.html

Not sure if you had a look at this previous painting thread there are other painters in the thread, not sure of there locations but it may be an option. Yes Dan would be the best option, he has done some amazing work for me, and I have seen a lot of his finished stuff, and I'm always impressed.

Robert
Old 02-26-2017, 04:16 PM
  #21  
oliveDrab
 
oliveDrab's Avatar
 
Join Date: Feb 2005
Location: Georgetown, KY
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by SECRET AGENT
The Ugandan Warrior strikes again! Ha!
Wait a minute! Uganda ... FEJ ... marcpamjoe ... and now honeycomb paint. He's back!!! arrrrrgggghhhhhhhhhh!
Old 02-27-2017, 04:01 PM
  #22  
Desertlakesflying
My Feedback: (28)
 
Join Date: Jul 2005
Location: Sun Valley, NV
Posts: 2,901
Received 62 Likes on 53 Posts
Default

I know an outstanding painter, but no one want to pay to ship their jets to Nevada and back to get painted even though he is cheaper than almost everyone and does better work. If you want a good paint job being a cheap skate is not an advantage.

Advance the video to 2:50 to see the paint going on and watch to the end to see the finish. This is just a plane he painted to fit the idea of the plane... He can do so much more...

https://www.youtube.com/watch?v=nopLmxc5XSg

Attached Thumbnails Click image for larger version

Name:	Stregaclear2.jpg
Views:	99
Size:	35.5 KB
ID:	2203262   Click image for larger version

Name:	Voodoo.jpg
Views:	78
Size:	70.3 KB
ID:	2203263   Click image for larger version

Name:	IMG_0805.JPG
Views:	73
Size:	87.4 KB
ID:	2203264   Click image for larger version

Name:	spacewalker45 004.jpg
Views:	117
Size:	1.11 MB
ID:	2203265  
Old 02-27-2017, 06:10 PM
  #23  
BlueBus320
My Feedback: (57)
 
Join Date: Mar 2002
Location: Rockville Centre
Posts: 1,674
Received 3 Likes on 2 Posts
Default

Same problem with finding builders. With the size & value of modern day jets, it's just not worth the cost, time, & risk to ship a 15-20k jet there & back. Especially to someone you don't personally know.. My opinion... Jay
Old 02-27-2017, 08:08 PM
  #24  
RJE
My Feedback: (13)
 
RJE's Avatar
 
Join Date: Apr 2002
Location: Chico, CA,
Posts: 186
Likes: 0
Received 0 Likes on 0 Posts
Default

Can I get a number for a quote for a high viz sport jet paint job?
thanks,
Ron 530-521-4329
Old 02-28-2017, 09:57 AM
  #25  
Desertlakesflying
My Feedback: (28)
 
Join Date: Jul 2005
Location: Sun Valley, NV
Posts: 2,901
Received 62 Likes on 53 Posts
Default

Originally Posted by BlueBus320
Same problem with finding builders. With the size & value of modern day jets, it's just not worth the cost, time, & risk to ship a 15-20k jet there & back. Especially to someone you don't personally know.. My opinion... Jay
Known the guy for 11 years and would trust him before my own family, and 99% of the population.

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.