Maxford USA 20% Jenny
10-20-2019, 10:27 AM
#1
Thread Starter
Join Date: Feb 2017
Location: Ct. 06524
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Maxford USA 20% Jenny
Excellent condition, 70cc TorqPro 4 stroke gas engine, hitec digital metal gear servos, as3x spektrum rec, setup to use 2s lipo thru regulator for radio and ignition. Opto kill switch. Has two small puncture repairs on bottom of bottom wing.
No shipping, paypal ok, willing to drive a reasonable distance to meet or deliver.
No shipping, paypal ok, willing to drive a reasonable distance to meet or deliver.
Last edited by Bipelover49; 10-31-2019 at 03:45 AM.
10-21-2019, 03:32 AM
#3
Thread Starter
Join Date: Feb 2017
Location: Ct. 06524
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
I will have to measure the height of the tail section and let you know. The tail section I believe was meant to be removable but due to the pull pull set up on rudder and elevator as well as the flying wires it might be a little difficult. If your really interested you should download the assembly manual on Maxfords website and study the assembly of the tail section.
Thx
Height of the center wing section from ground 31"
Height of the rudder from the ground 21"
Thx
Height of the center wing section from ground 31"
Height of the rudder from the ground 21"
Last edited by Bipelover49; 10-22-2019 at 01:53 AM.
