Fadec Gaspar problem
#1
Thread Starter
Join Date: Dec 2004
Location: POLAND
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Fadec Gaspar problem
Hi
Have the problem I from my the Gaspar ECU in turbine of Simjet. ECU it informs " radio setup incorrect " or " Failsafe " [] problem stepped out alone, without reasons. So far all acted well ...Receiver it ok ,in what problem ?
Regards
Robert
Have the problem I from my the Gaspar ECU in turbine of Simjet. ECU it informs " radio setup incorrect " or " Failsafe " [] problem stepped out alone, without reasons. So far all acted well ...Receiver it ok ,in what problem ?
Regards
Robert
#2
My Feedback: (2)
RE: Fadec Gaspar problem
Hi Robert,
I have the following recommendations,
Reprogram the ECU to the transmitter.
Be sure that you are not "swamping" the ECU by having your Transmitter directly over or next to the ECU when operating.
Be sure that you RX is kept away from your ECU.
Be sure that you have the ECU RX cable pulged in the Rx correctly and into the Throttle channel.
Last, be sure your ECU and RX batteries are putting out the specified voltages.
Best Regards,
I have the following recommendations,
Reprogram the ECU to the transmitter.
Be sure that you are not "swamping" the ECU by having your Transmitter directly over or next to the ECU when operating.
Be sure that you RX is kept away from your ECU.
Be sure that you have the ECU RX cable pulged in the Rx correctly and into the Throttle channel.
Last, be sure your ECU and RX batteries are putting out the specified voltages.
Best Regards,