which regulator for a jet
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Jul 2002
Location: Parsippany,
NJ
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
which regulator for a jet
I am putting together a Composite ARF Rookie with a JetCat P-80 (21lbs thrust) in it.
I'll have 4, possibily 6, Hitec 5955's and several other high(not quite as high) torque servos in it.
I'm told this will be a 200mph airplane.
Is the Super Reg enough or should I go with the Turbo Reg?
Thanks
Bob K
I'll have 4, possibily 6, Hitec 5955's and several other high(not quite as high) torque servos in it.
I'm told this will be a 200mph airplane.
Is the Super Reg enough or should I go with the Turbo Reg?
Thanks
Bob K
#2
Senior Member
Join Date: Sep 2004
Location: Tempe,
AZ
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
RE: which regulator for a jet
Hi Bob,
While I am not an expert on jets, the SuperReg should do you just fine. I say this from looking at what my friend puts in his jets. I will forward this link to him and see if he has any comments.
While I am not an expert on jets, the SuperReg should do you just fine. I say this from looking at what my friend puts in his jets. I will forward this link to him and see if he has any comments.
#3
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Jul 2002
Location: Parsippany,
NJ
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: which regulator for a jet
Thanks Bob.
I'm not used to this fast a reply from suppliers!
You definitly have my business.
I prefer to buy through my local hobby shop.
Bob K
I'm not used to this fast a reply from suppliers!
You definitly have my business.
I prefer to buy through my local hobby shop.
Bob K