PowerExpander Sport Plus and Zenoah G-38
#1
Thread Starter
Join Date: Feb 2006
Location: Alexander City,
AL
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
PowerExpander Sport Plus and Zenoah G-38
Hey I see that the PESP is rated for 40-85 cc engines. I have a Hanger 9, P-47 that will have two 6 volt battery packs. Considering this, is the G-38 close enough to use the PESP? It has eveything I need, 2 battery capability, battery regulator and fiber optic ignition cutoff.
#2
Senior Member
Join Date: Sep 2004
Location: Tempe,
AZ
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
RE: PowerExpander Sport Plus and Zenoah G-38
HI BBOwen,
Actually there is no lower limit. We should have said "up to 85cc". Does the G-38 have an electronic ignition? We do not work with magnetos.
Actually there is no lower limit. We should have said "up to 85cc". Does the G-38 have an electronic ignition? We do not work with magnetos.
#3
Thread Starter
Join Date: Feb 2006
Location: Alexander City,
AL
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
RE: PowerExpander Sport Plus and Zenoah G-38
Yes it is has been converted to EI. I am glad to hear that it is ok. That unit is just what the doctor ordered.
I just noticed that the Power Expander is set up for 8 channels. I am using a Futaba 9c PCM RX. Could the IGN input be considered a 9th channel?
Thanks Robert!
I just noticed that the Power Expander is set up for 8 channels. I am using a Futaba 9c PCM RX. Could the IGN input be considered a 9th channel?
Thanks Robert!