Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Results 1 to 3 of 3

  1. #1

    Join Date
    May 2006
    Location
    chesterland, OH
    Posts
    5
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    Sport plus w/ 35% plane

    Hi,
    I was wondering if i could get away with using the Sport plus with a 35% plane,

    My set up is:
    Hitec 5945s 4 on wings
    jr 8611s on elevators
    jr 8611 on rudder

    thanks,

    Bob

  2. #2

    Join Date
    Sep 2004
    Location
    Tempe, AZ
    Posts
    941
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Sport plus w/ 35% plane

    Hi Bob,
    You do not say if you want to use the PowerExpander Sport Plus or the PowerSystem Sport Plus. If you are talking the PowerSystem Sport Plus do not recommend it. The current draw would probably pull the regulator below 6.0V best case. Worst case you will overload the regulator and it will fail. If you are talking the PowerExpander Sport Plus you "could" use it but you are not going to get good voltage to the servos because you are going to create a large voltage drop across the connectors on the battery inputs because they are standard R/C connectors and not Deans connectors. Officially both these units are for planes up to 85cc and about 18 pounds. Let me know if you have any other questions.
    Robert Ritchey
    Owner, Smart-Fly
    www.Smart-Fly.com

  3. #3

    Join Date
    May 2006
    Location
    chesterland, OH
    Posts
    5
    Gallery
    My Gallery
    Models
    My Models
    Ratings
    My Feedback

    RE: Sport plus w/ 35% plane

    Thank you for your responce,
    I just bought the PowerSystem Eq6.

    Thanks Again

    Bob


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -6. The time now is 03:10 AM.

SEO by vBSEO 3.6.1 ©2011, Crawlability, Inc.