Batt-Share??
#1
Thread Starter
My Feedback: (66)
Join Date: Jul 2003
Location: Levittown,
NY
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Batt-Share??
I have read that if you use (2) NiMh in parallel, the mOhms are cut in half. If I use (2) 2000ma packs that are 10 mOhms each, I should have 4000 ma at 5 mOhms? Does the Batt-Share affect the mOhms in any way?
Thanks,
Larry
Thanks,
Larry
#2
Senior Member
Join Date: Sep 2004
Location: Tempe,
AZ
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
RE: Batt-Share??
Hi Larry,
In essence, since you are drawing current from both battery packs you are cutting the mOhms in half. Any time you parallel resistance you get 1/2 the resistance if the resistances are equal. The BatShare does not affect this.
Let me know if you have any other questions.
In essence, since you are drawing current from both battery packs you are cutting the mOhms in half. Any time you parallel resistance you get 1/2 the resistance if the resistances are equal. The BatShare does not affect this.
Let me know if you have any other questions.