WTB CEN Wave Shark Upgrade
#1
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Wilmington,
NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
WTB CEN Wave Shark Upgrade
I have a cen wave shark w/a stock 550 Ive never realy ran it b/c its slow. I would like to upgrade it to does anyone have a good brushed or brushless setup they want to let go for a good price. Im wanting to take to beach and jump some waves
LMK thanks
Dave
LMK thanks
Dave
#4
My Feedback: (3)
Join Date: Apr 2008
Location: Macedon, NY
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
Hi Dave,
I just added a brushless set up to my Wave Shark and would be willing to sell you the brushed set up I took out. I was running 2, NiMh packs 14.4 Volts with a Jeti ESC and a brushed motor. I purchased it from Offshoreelectrics as an upgrade to my Wave Shark. I was running a Prather 215 prop and it made it fly! I never GPS'd it but I know I was close to 40mph. Almost to fast when I was jumping waves. I'll take some pictures tonight if you are interested. How much are you looking to spend?
Nice job on the paint for your. Really looks cool. You WILL have to find a better way to secure the hatch. Mine kept blowing off the back end when jumping waves. You can easily get 4-5 feet of air with this set up. I ended up putting a screw in the back to secure it.
Tom
I just added a brushless set up to my Wave Shark and would be willing to sell you the brushed set up I took out. I was running 2, NiMh packs 14.4 Volts with a Jeti ESC and a brushed motor. I purchased it from Offshoreelectrics as an upgrade to my Wave Shark. I was running a Prather 215 prop and it made it fly! I never GPS'd it but I know I was close to 40mph. Almost to fast when I was jumping waves. I'll take some pictures tonight if you are interested. How much are you looking to spend?
Nice job on the paint for your. Really looks cool. You WILL have to find a better way to secure the hatch. Mine kept blowing off the back end when jumping waves. You can easily get 4-5 feet of air with this set up. I ended up putting a screw in the back to secure it.
Tom
#7
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Wilmington,
NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
Big Thanks to tomstoy2 for hooking me up !
Ill post some pics/video soon . Just need to bend some motor cooling and Im all set. I picked up a 4-5 mm graupner motor collet from lhs ,
Ill post some pics/video soon . Just need to bend some motor cooling and Im all set. I picked up a 4-5 mm graupner motor collet from lhs ,
#8
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Wilmington,
NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
Heres a couple pics of install . Had to drill holes in hull for water lines ,the 550 version has no water cooling . Just need to get prop and add a shaft brace .
#9
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Wilmington,
NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
I have a few props to try first a octura x438, and a dumas jgf22. Well see how they run I was told a Prather 215 would be a good choice. But I ahave these on hand
#11
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Wilmington,
NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
Well I got a chance to run her today and I was really happy with performance. It jumps out of water on a slight hole shot and runs pretty fast . I beleave it would beat my nitro .18 version . I used a carbon f. prop I had from off shore elect. I had on my nitro version . After about 10 -12 min I brought it in and the cooling system worked great packs and esc were just warm nothing major . And I used about 45% out of my 5200 packs.it wants to hop around now at 3/4 throttle so Im gonna fab up some trim tabs and see how that helps . I want to avoid adding weight to front if I can help it . So far Im very happy with set up . I did mount the rec. under servo tray in ballon and added a y splice to run a battery through steering servo leg.
#12
My Feedback: (3)
Join Date: Apr 2008
Location: Macedon, NY
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
ORIGINAL: Darkseacret
Well I got a chance to run her today and I was really happy with performance. It jumps out of water on a slight hole shot and runs pretty fast . I beleave it would beat my nitro .18 version . I used a carbon f. prop I had from off shore elect. I had on my nitro version . After about 10 -12 min I brought it in and the cooling system worked great packs and esc were just warm nothing major . And I used about 45% out of my 5200 packs.it wants to hop around now at 3/4 throttle so Im gonna fab up some trim tabs and see how that helps . I want to avoid adding weight to front if I can help it . So far Im very happy with set up . I did mount the rec. under servo tray in ballon and added a y splice to run a battery through steering servo leg.
Well I got a chance to run her today and I was really happy with performance. It jumps out of water on a slight hole shot and runs pretty fast . I beleave it would beat my nitro .18 version . I used a carbon f. prop I had from off shore elect. I had on my nitro version . After about 10 -12 min I brought it in and the cooling system worked great packs and esc were just warm nothing major . And I used about 45% out of my 5200 packs.it wants to hop around now at 3/4 throttle so Im gonna fab up some trim tabs and see how that helps . I want to avoid adding weight to front if I can help it . So far Im very happy with set up . I did mount the rec. under servo tray in ballon and added a y splice to run a battery through steering servo leg.
Tom
#13
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Wilmington,
NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
Well Last night I got a chance to fab up some trim tabs . Im happy with results . I may place rec battery pack up front to shift weight around but not adding any additional weight. Ill try and post a video soon .
#14
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Wilmington,
NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
RE: WTB CEN Wave Shark Upgrade
Got a chance to run her today w the trim tabs and what a huge differance . before it woulld keep hopping out of the water at full throttle now it rides just right.